Scope: This Technical Report gives the designations, descriptions and reference micrographs of the matrix structures of cast irons. It applies to the following types of cast irons: — grey cast irons (Table 4.1); — spheroidal graphite cast irons (Table 4.2); — austenitic cast irons (Table 4.3); — malleable cast irons (Table 4.4); — compacted (vermicular) graphite cast irons (Table 4.5); — ausferritic spheroidal graphite cast irons (Table 4.6); — abrasion-resistant cast irons (Table 4.7). Each matrix structure is defined with explanations and micrographs. Unless otherwise stated in Clause 4, the micrographs shown correspond to samples etched with a solution of 2 % nitric acid in ethanol (Nital). 2 Designations and descriptions of cast iron microstructures 2.1 Ferrite Ferrite also known as α-ferrite (α-Fe) or alpha iron is a materials science term for iron, or for a solid solution with iron as the main constituent, with a body-centred cubic crystal structure. It is this crystalline structure which gives to steels and cast irons their magnetic properties, and is the classic example of a ferromagnetic material. Since pearlite has ferrite as a component, any iron-carbon alloy will contain some amount of ferrite if it is allowed to reach equilibrium at room temperature. The exact amount of ferrite will depend on the cooling processes the iron-carbon alloy undergoes when it cools from liquid state. 2.2 Pearlite Pearlite is a two-phased, lamellar (or layered) structure composed of alternating layers of alpha- ferrite (according thermal dynamical condition 88 % by mass) and cementite (12 % by mass). The lamellar appearance is misleading since the individual lamellae within a colony are connected in three dimensions; a single colony is therefore an interpenetrating bicrystal of ferrite and cementite. Pearlite is a common microstructure occurring in many grades of cast irons. If cast iron is cooled very slowly or as a result of heat treatment, the cementite can occur in globules inste