ISO 1985-2015 PDF

ISO 1985-2015 PDF

Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy

$60.00 $120.00 -50%
Product Code: ISO 1985
Stock In Stock
Edition: 4TH
Published: 03/01/2015
Number of Pages: 32
File Size: 1 file, 569 Bytes

Available Options

Product Description

Machine Tools - Test Conditions for Surface Grinding Machines with Vertical Grinding Wheel Spindle and Reciprocating Table - Testing of the Accuracy

Introduction: The purpose of this International Standard is to standardize methods of testing the accuracy of general purpose and normal accuracy surface grinding machines with vertical grinding wheel spindle and reciprocating table. The primary function of such machines is to provide flat surfaces on workpieces. This International Standard specifies the tests to verify the geometric accuracy of the machine to achieve this primary function. For example, the test to check the straightness of the column movement (Y-axis) in the horizontal XY-plane (EXY) is removed from ISO 1985:1998, since it is not directly correlated to this primary function. Positioning repeatability test for automatic mode (Not NC) is introduced. References to ISO 230-1 are revised and referred to 2012 edition. © ISO 2015 – All rights reserved

Scope: This International Standard specifies, with reference to ISO 230-1 and ISO 230-7, both geometric and machining tests on general purpose, normal accuracy, manually, and numerically controlled (NC) surface grinding machines with reciprocating table and vertical grinding wheel spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This International Standard is not applicable to surface grinding machines with fixed or rotating tables or to machines having longitudinal traverse of the wheelhead. This International Standard deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy. This International Standard provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841:2001. NOTE In addition to the terms used in the official ISO languages (English and French), this International Standard gives the equivalent terms in the German, Italian, Persian, and Japanese languages in Annex B; these are published under the responsibility of the national member bodies for Germany (DIN), Italy (UNI), Iran (ISIRI), and Japan (JISC). However, only the terms given in the official language can be considered as ISO terms.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1985-2015 PDF

ISO 1985-2015 PDF

$60.00 $120.00