ISO 19882-2025 PDF

ISO 19882-2025 PDF

Gaseous hydrogen-Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers

$113.50 $227.00 -50%
Product Code: ISO 19882
Stock In Stock
Edition: 2.
Published: 02/2025
Number of Pages: 40
File Size: 1 file, 1 Byte

Available Options

Product Description

Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers

Introduction: The purpose of this document is to promote the implementation of hydrogen powered land vehicles through the creation of performance-based testing requirements for thermally activated pressure relief devices for compressed hydrogen fuel containers. The successful commercialization of hydrogen land vehicle technologies requires standards pertaining vehicle fuel system components and the global homologation of standards requirements for technologies with the same end use. This will allow manufacturers to achieve economies of scale in production through the ability to manufacture one product for global use. Documents which apply to hydrogen fuel vehicles and hydrogen fuel subsystems include IEC 62282- 4-101, SAE J2578, SAE J2579, UN ECE R134, or UN GTR No. 13. Annex A presents an informative record of recommended fuel container, fuel storage subsystem and vehicle level requirements. The statements in Annex A are intended as recommendations for consideration of inclusion by the organizations and committees developing standards on these sub-system and vehicle level standards. Annex B presents a rationale for the design qualification tests in this document. This document is based on the CSA Standard CSA/ANSI HPRD 1:21. © ISO 2025 – All rights reserved

Scope: This document specifies minimum requirements for pressure relief devices intended for use on hydrogen fuelled vehicle fuel containers that comply with ISO 19881, IEC 62282-4-101, CSA/ANSI HGV 2, EC79/EU406, SAE J2579, UN ECE R134, or the UN GTR No. 13. The applicability of this document is limited to thermally activated pressure relief devices installed on fuel containers containing gaseous hydrogen according to ISO 14687 for fuel cell and internal combustion land vehicles. This document specifies requirements for thermally activated pressure relief devices acceptable for use on-board the following types of land vehicles: light-duty vehicles; heavy-duty vehicles; industrial powered trucks, such as forklifts and other material handling vehicles. Requirements for other types of land vehicles such as rail, off-road, etc., can be derived with due consideration of appropriate service conditions. This document does not apply to reseating, resealing, or pressure-activated devices. Pressure relief devices can be of any design or manufacturing method that meets the requirements of this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19882-2025 PDF

ISO 19882-2025 PDF

$113.50 $227.00