ISO 20049-1-2020 PDF

ISO 20049-1-2020 PDF

Solid biofuels-Determination of self-heating of pelletized biofuels-Part 1: Isothermal calorimetry

$113.50 $227.00 -50%
Product Code: ISO 20049-1
Stock In Stock
Edition: 1ST
Published: 05/2020
Number of Pages: 34
File Size: 1 file, 2 Bytes

Available Options

Product Description

Solid biofuels — Determination of self-heating of pelletized biofuels — Part 1: Isothermal calorimetry

Introduction: There is a continuous global growth in production, storage, handling, bulk transport and use of solid biofuels especially in the form of pelletized biofuels. The specific physical and chemical characteristics of solid biofuels, their handling and storage can lead to a risk of fire and/or explosion, as well as health risks such as intoxication due to exposure to carbon- monoxide, asphyxiation due to oxygen depletion or allergic reactions. Heat can be generated in solid biofuel by exothermic biological, chemical and physical processes. Biological processes include the metabolism of fungus and bacteria and occur at lower temperatures; the oxidation of wood constituents increases with temperature and dominates at higher temperatures; the heat production from biological and chemical processes leads to transport of moisture in the bulk material, with associated sorption and condensation of water, which both are exothermic processes. In, for example, a heap of stored forest fuel or a heap of moist wood chips, all of these processes can be present and contribute to heat production. Solid biofuels such as wood pellets, however, are intrinsically sterile[1] due to the conditions during manufacturing (exposure to severe heat during drying, fragmentation during hammermilling and pressure during extrusion) but can attract microbes if becoming wet during handling and storage resulting in metabolism and generation of heat. Leakage of water into a storage of wood pellets can also lead to the

Scope: This document: a) specifies a general test procedure for quantification of the spontaneous heat generation from solid biofuel pellets using isothermal calorimetry; b) specifies a screening test procedure for wood pellets using an instrument temperature of 60 °C; c) establishes procedures for sampling and sample handling of solid biofuel pellets prior to the analysis of spontaneous heat generation; and d) gives guidance on the applicability and use of isothermal calorimetry for calculation of the net reaction rate of the heat producing reactions of solid biofuel pellets. The test procedure given in this document quantifies the thermal power (heat flow) of the sample during the test, it does not identify the source of self-heating in the test portion analysed. Data on spontaneous heat generation determined using this document is only associated with the specific quality and age of the sample material. The results are product specific. This document is applicable to solid biofuel pellets only. The information derived using this document is for use in quality control and in hazard and risk assessments related to the procedures given in ISO 20024:2020.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20049-1-2020 PDF

ISO 20049-1-2020 PDF

$113.50 $227.00