ISO 20136-2020 PDF

ISO 20136-2020 PDF

Leather-Determination of degradability by micro-organisms

$96.50 $193.00 -50%
Product Code: ISO 20136
Stock In Stock
Edition: 2ND
Published: 06/2020
Number of Pages: 32
File Size: 1 file, 3 Bytes

Available Options

Product Description

Leather — Determination of degradability by micro-organisms

Introduction: One of the main issues faced by the footwear industry is waste treatment. Such wastes, and especially leather, even though they are considered non-hazardous by the regulations in force, are generated in vast quantities and mostly end up in landfills, where natural degradation time is much longer than the product’s useful life. Faced with this problem, there is a growing search for alternative tanning agents that confer the same properties on leather as those provided by the agents currently employed, but which in turn reduce the time to biodegrade in nature. This document allows the measurement of leather biodegradability in a liquid system by using aerobic microorganisms as an inoculum. The test is considered valid when collagen (positive control) degrades by at least 70 % in a maximum period of 50 days. In order to determine how biodegradable a leather sample (test material) is, its percentage degradability value is compared with the percentage degradability value obtained in collagen, in the same test and period of time. The closer the percentage degradability values, the shorter the time to biodegrade in nature. Therefore, those test materials showing percentage degradability values well below the collagen value will require a longer time for biodegradation in nature. IULTCS/IUC 37:2020(E) © ISO 2020 – All rights reserved

Scope: This document specifies a test method to determine the degree and rate of aerobic biodegradation of hides and skins of different animal origin, whether they are tanned or not, through the indirect determination of CO2 produced by the degradation of collagen. The test material is exposed to an inoculum (activated sludge from tannery wastewater) in an aqueous medium. If there is not a tannery nearby then urban wastewater can be used as the inoculum. The conditions established in this document correspond to optimum laboratory conditions to achieve the maximum level of biodegradation. However, they might not necessarily correspond to the optimum conditions or maximum level of biodegradation in the natural medium. In general, the experimental procedure covers the determination of the degradation degree and rate of the material under controlled conditions, which allows the analysis of the evolved carbon dioxide produced throughout the test. For this purpose, the testing equipment complies with strict requirements with regard to flow, temperature and agitation control. This method applies to the following materials: — natural polymers of animal stroma (animal tissue/skins); — animal hides and skins tanned (leather) using organic or inorganic tanning agents; — leathers that, under testing conditions, do not inhibit the activity of microorganisms present in the inoculum.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20136-2020 PDF

ISO 20136-2020 PDF

$96.50 $193.00