ISO 19702-2024 PDF

ISO 19702-2024 PDF

Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy

$145.50 $291.00 -50%
Product Code: ISO 19702
Stock In Stock
Edition: 3.
Published: 12/2024
Number of Pages: 78
File Size: 1 file, 6 Bytes

Available Options

Product Description

Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy

Introduction: Sampling and analysis of fire effluents is required for a variety of applications in life threat assessments[4][11] [26] and environmental impact from fires assessments.[6] The end result of these analyses is a list of chemical species and their concentrations in the effluent at a specific time or over a time interval, and at a specific location, during (and possibly after) the period of generation of the effluents. Depending on the end use of these data, the requirements can range from a highly detailed, time-resolved, quantified and validated list of chemical species to a simple estimate of a single compound or small range of compounds. Although methods used in other fields are occasionally employed (e.g. atmospheric pollution), obtaining relevant data often requires specialized sampling and analysis techniques. This is due to the complexity, reactivity and generally “hostile” nature of typical fire effluents, as well as the commonly observed rapid changes in concentrations with time and distance from the fire source. The following typical properties of fire effluents render more “traditional” methods of sampling and analysis inappropriate: — high temperatures of 1 000 °C or higher; — presence of aerosols (i.e. solid and liquid particulates) with a wide range of particle sizes and distribution, together with adsorbed and absorbed chemical species; — presence of condensable organic and inorganic vapours (e.g. water); — high turbulence, with spatially and temporally variable

Scope: This document specifies requirements and makes recommendations for sampling systems for use in small- scale and large-scale fire tests, for the selection of parameters and use of the FTIR instrument, and for the collection and use of calibration spectra. The primary purpose of the methods outlined in this document is to measure the concentrations of chemical species in fire effluents which can be used to: a) provide data for use in combustion toxicity assessment without requiring biological studies; b) allow the calculation of yield data in fire characterization studies; c) provide data for use in mathematical modelling of hazard to life from the fire effluent by characterizing the effluent composition generated by physical fire models; d) characterize the effluent composition of small-scale physical models and larger-scale fires for comparative purposes; e) assist in the validation of numerical fire models; f) set the conditions for exposure in biological studies if required; g) monitor biological studies where used; and h) assist in the interpretation of biological studies where used. This document specifies principles of sampling and methods for the individual analysis, in fire effluents, of airborne volume fractions of carbon monoxide (CO), carbon dioxide (CO2), hydrogen cyanide (HCN), hydrogen chloride (HCl), hydrogen bromide (HBr), nitric oxide (NO), nitrogen dioxide (NO2) and acrolein (CH2CHCHO). NOTE Depending on the optical path length, there can potentially be some saturation of certain spectral lines at high concentration, leading to incorrect volume fractions. In most common cases, a wide concentration range can be measured by an FTIR instrument. Typically, it is in the range of a few µl/l to thousands of µl/l for HCl, HBr, HF, SO2, NOx, and HCN, and up to a few per cent for CO, CO2 and H2O. These mentioned species are only indicative, and many other species could be added.[27] Although not specifically defined in this document, as they were not specifically studied in the SAFIR project,[18] the method presented is also suitable for analysis of other gaseous species, including e.g. hydrogen fluoride (HF) and sulfur dioxide (SO2) with appropriate samp

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19702-2024 PDF

ISO 19702-2024 PDF

$145.50 $291.00