ISO 19891-1-2017 PDF

ISO 19891-1-2017 PDF

Ships and marine technology - Specifications for gas detectors intended for use on board ships - Part 1: Portable gas detectors for atmosphere testing of enclosed spaces

$31.50 $63.00 -50%
Product Code: ISO 19891-1
Stock In Stock
Edition: 1ST
Published: 07/2017
Number of Pages: 12
File Size: 1 file, 301 Bytes

Available Options

Product Description

Ships and marine technology - Specifications for gas detectors intended for use on board ships - Part 1: Portable gas detectors for atmosphere testing of enclosed spaces

Introduction: This document specifies performance, gases to be measured, tolerances for gas measurement, and testing requirements of portable gas detectors used for testing of the atmosphere in enclosed spaces onboard ships prior to entry into those spaces, as required by SOLAS regulation XI-1/7 “Atmosphere testing instrument for enclosed spaces”. This document specifies the characteristics that portable gas detectors should be assessed against items such as: which gases can be measured, sensitivities, indications, alarm levels, protection against shock, temperature and water ingress, and additional requirements for spaces or areas where a risk of explosion exists. This document specifies the marine environmental conditions in which portable gas detectors are expected to be used. This document does not define differences between gases and vapours, nor does it give technical detail on calculations and methodology for explosive limits and operational exposure levels. The intent of this document is to simplify the subject to the essentials and use references for the actual scientific standards if more detailed explanations are required. Portable gas detectors conforming to this document should only be used onboard ships in accordance with IMO requirements and procedures. This document does not provide a specification on how to use portable gas detectors, or how to enter enclosed spaces. © ISO 2017 – All rights reserved

Scope: This document provides specifications on performance, gases to be measured, sensitivities, indications, alarm levels, protection against shock, temperature and water ingress, and testing requirements of portable gas detectors used for atmosphere testing of enclosed spaces onboard ships prior to entry into those spaces. This document specifies suitable portable gas detectors for compliance with SOLAS regulation XI-1/7 “Atmosphere testing instrument for enclosed spaces”, and may be used for deciding whether portable gas detectors available on the market are suitable for compliance with these SOLAS requirements. NOTE 1 SOLAS regulation XI-1/7 requires appropriate portable atmosphere testing instrument or instruments to be carried onboard ships, by 1 July 2016. The SOLAS regulation requires, as a minimum, the appropriate portable atmosphere testing instrument or instruments to be capable of measuring concentrations of oxygen, flammable gases or vapours, hydrogen sulphide and carbon monoxide prior to entry into enclosed spaces. For the purpose of measurement of concentrations of flammable gases or vapours, this document specifies the flammable gas as either “methane” or “propane and butane”, and requires clear marking of types of flammable gases which can be measured by the portable gas detectors. Flammable vapours/gases which are not marked cannot be measured or detected by the portable gas detector. NOTE 2 Iso-butane is an alternative calibration gas of portable gas detectors in measuring propane and butane. This document does not give any indication of toxicity of the flammable gases.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19891-1-2017 PDF

ISO 19891-1-2017 PDF

$31.50 $63.00