ISO 19970-2025 PDF

ISO 19970-2025 PDF

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels-Metering of gas as fuel on LNG carriers during cargo transfer operations

$71.50 $143.00 -50%
Product Code: ISO 19970
Stock In Stock
Edition: 2.
Published: 07/2025
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations

Introduction: Concerns over the emission of pollutants from ship exhausts prompted IMO to enact MARPOL Annex VI[14] to the IMO Protocol of 1997, which sets limits on sulfur oxide (SOx) and nitrogen oxide (NOx) emissions. MARPOL Annex VI also specifies a global cap which limits the permitted sulfur content of fuel oil to a mass fraction of 3,5 % and special SOx emission control areas (SECAs) where the sulfur contents must not exceed a mass fraction of 1,0 %. In order to comply with these requirements, ships generally require special facilities to be installed to limit SOx emissions, unless they use low sulfur fuel oil. Liquefied natural gas (LNG) carriers are capable of utilizing boil-off gas (BOG) in ships and shore tanks. They return gas during the cargo transfer operation as fuel for their own power generation, if commercial value of such energy consumed on board is accountable as an element of custody transfer measurement. This document provides the procedures for metering gas and assessing its calorific value, and the requirements for metering devices. Aspects of safety are not dealt with in this document. It is the responsibility of the user to ensure that the system meets applicable safety regulations. © ISO 2025 – All rights reserved

Scope: This document specifies the minimum requirements to quantify boil-off gas (BOG) consumed on liquefied natural gas (LNG) carriers for their own functions, in particular for power generation and during cargo transfer operations. This document provides requirements for the metering of BOG and the subsequent calorific value calculations, which can be taken into account when the energy transferred during cargo transfer is determined. This document also gives performance requirements and calibration of the elements included in the BOG measurement system. This document, with some modifications, can also be applied to the measurement of BOG consumed by LNG carriers at sea.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19970-2025 PDF

ISO 19970-2025 PDF

$71.50 $143.00