ISO 19991-2026 PDF

ISO 19991-2026 PDF

Fusion technology-Experimental magnetic confinement fusion facilities-Supersonic molecular beam injection fuelling technique for fusion devices

$71.50 $143.00 -50%
Product Code: ISO 19991
Stock In Stock
Edition: 1.
Published: 08/2026
Number of Pages: 20
File Size: 1 file, 830 KB

Available Options

Product Description

Fusion technology — Experimental magnetic confinement fusion facilities — Supersonic molecular beam injection fuelling technique for fusion devices

Introduction: The plasma fuelling system is integral to magnetic confinement fusion devices, including DEMO and other fusion facilities. Supersonic molecular beam injection (SMBI) is a key candidate for fuel injection, offering high efficiency with reduced wall retention of gases. SMBI has demonstrated good fuelling efficiency in many medium and small-sized devices, with higher efficiency compared to conventional methods. Although its fuelling efficiency may attenuate in large-scale equipment, long-pulse discharges in superconducting devices have shown that the good directionality of SMBI can significantly reduce wall retention[1]. This reduction in wall retention is particularly significant for the utilization of tritium in future fusion facilities. Unlike conventional gas fuelling systems that utilize gas diffusion and are susceptible to wall retention, leading to unpredictable plasma density changes and possible facility shutdown, SMBI, with its high beam velocity, effectively mitigates such risks. Comparing to fuel pellet injection, SMBI has lower fuelling efficiency, but provides significant system stability. Currently, tritium pellet technology is not yet sufficiently mature. Therefore, as technology advances, SMBI can be considered as a complementary component of an effective fuelling system for future fusion facilities, alongside pellet injection. © ISO 2026 – All rights reserved

Scope: This document specifies the methods and the requirements for the supersonic molecular beam injection (SMBI) fuelling technique used in experimental magnetic confinement fusion facilities. It outlines the SMBI system components, specific requirements, and inspection procedures to ensure the effective and controlled injection of plasma fuel into fusion devices such as international thermonuclear experimental reactor and demonstration power plant. This document applies to the formation of supersonic molecular beam (SMB) and usage of the SMBI technique on the fusion devices, including the specification of gas pressure adjustment, beam characteristics and injection rate requirements, as well as the procedures for verifying these parameters.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19991-2026 PDF

ISO 19991-2026 PDF

$71.50 $143.00