ISO 20138-1-2018 PDF

ISO 20138-1-2018 PDF

Railway applications - Calculation of braking performance (stopping, slowing and stationary braking) - Part 1: General algorithms utilizing mean value calculation

$145.50 $291.00 -50%
Product Code: ISO 20138-1
Stock In Stock
Edition: 1.
Published: 10/2018
Number of Pages: 88
File Size: 1 file, 3 Bytes

Available Options

Product Description

Railway applications - Calculation of braking performance (stopping, slowing and stationary braking) - Part 1: General algorithms utilizing mean value calculation

Introduction: This document describes methodologies for calculation of braking performance, such as stopping distance, deceleration, power and energy for railway rolling stock. The calculations can be used at any stage of the assessment process (design, manufacture, testing, verification, investigation, etc.) of railway rolling stock. The objective of this document is to enable the railway industry and operators to work with common calculation methods. This document is published in two separate parts (ISO 20138‑1 and ISO 20138‑2), which will complement each other and can be used separately, depending on the requirements of the user. The first part of the standard describes a common calculation method for railway applications applicable to all countries. It describes the general algorithms/formulae using mean value inputs to perform calculations of brake equipment and braking performance, in terms of stopping and slowing distances and safety for parking brake, for all types of trainsets and single vehicles. In addition, the algorithms provide a means of comparing the results of other braking performance calculation methods. The second part of the standard details the step by step calculation methodology utilizing instantaneous values of brake force provided by each operational brake equipment type throughout the stopping/ slowing time. The two separate parts of the standard relate to each other but can be used separately, depending on the requirements of the user. vi © ISO 2018 – All right

Scope: This document specifies methodologies for calculation of braking performance for railway rolling stock and is applicable to all countries. This document describes the general algorithms/formulae using mean value inputs to perform calculations of brake equipment and braking performance in terms of stopping/slowing distances, stationary braking, power and energy for all types of rolling stock, either as single vehicles or train formations, with respect to the braking distance. The calculations can be used at any stage of the assessment process (design, manufacture, testing, verification, investigation, etc.) of railway rolling stock. This document does not set out the specific acceptance criteria (pass/fail). This document is not intended to be used as a design guide for selection of brake systems and does not specify performance requirements. This document does not provide a method to calculate the extension of stopping distances when the level of available adhesion is exceeded (wheel slide activity). This document contains examples of the calculation of brake forces for different brake equipment types and calculation of stopping distance and stationary braking relevant to a single vehicle or a train.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20138-1-2018 PDF

ISO 20138-1-2018 PDF

$145.50 $291.00