ISO 20181-2023 PDF

ISO 20181-2023 PDF

Stationary source emissions-Quality assurance of automated measuring systems

$145.50 $291.00 -50%
Product Code: ISO 20181
Stock In Stock
Edition: 1.
Published: 02/2023
Number of Pages: 82
File Size: 1 file, 4 Bytes

Available Options

Product Description

Stationary source emissions — Quality assurance of automated measuring systems

Introduction: This document describes the quality assurance procedures needed to ensure that an automated measuring system (AMS) installed to measure emissions to air are capable of meeting the uncertainty requirements on measured values e.g. given by legislation[1],[2],[3] or more generally by competent authorities. Three different quality assurance levels (QAL1, QAL2, and QAL3) are defined to achieve this objective. These quality assurance levels cover the suitability of an AMS for its measuring task (e.g. before or during the purchase period of the AMS), the validation of the AMS following its installation, and the control of the AMS during its ongoing operation on an industrial plant. An annual surveillance test (AST) is also defined. The suitability evaluation (QAL1) of the AMS and its measuring procedure are described in EN 15267- 3 and ISO 14956 where a methodology is given for calculating the total uncertainty of AMS measured values. This total uncertainty is calculated from the evaluation of all the uncertainty components arising from its individual performance characteristics that contribute.  © ISO 2023 – All rights reserved

Scope: This document specifies procedures for establishing quality assurance levels (QAL) for automated measuring systems (AMS) installed on industrial plants for the determination of the flue gas components and other flue gas parameters. This document specifies: — a procedure (QAL2) to calibrate the AMS and determine the variability of the measured values obtained by it, so as to demonstrate the suitability of the AMS for its application, following its installation; — a procedure (QAL3) to maintain and demonstrate the required quality of the measurement results during the normal operation of an AMS, by checking that the zero and span characteristics are consistent with those determined during QAL1; — a procedure for the annual surveillance tests (AST) of the AMS in order to evaluate (i) that it functions correctly and its performance remains valid and (ii) that its calibration function and variability remain as previously determined. This document is designed to be used after the AMS has been certified in accordance with the series of documents EN 15267.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20181-2023 PDF

ISO 20181-2023 PDF

$145.50 $291.00