ISO 20263-2024 PDF

ISO 20263-2024 PDF

Microbeam analysis-Analytical electron microscopy-Method for the determination of interface position in the cross-sectional image of the layered materials

$129.00 $258.00 -50%
Product Code: ISO 20263
Stock In Stock
Edition: 2.
Published: 11/2024
Number of Pages: 54
File Size: 1 file, 8 Bytes

Available Options

Product Description

Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials

Introduction: Multi-layered materials are widely used in the production of semiconductor devices, various kinds of sensors, coating films for optical element, new functional materials, etc. One of the factors used to determine the characteristics of multi-layered materials is the layer thickness, for evaluation of products and verification of the production process. In practice, measuring the total thickness and/or the thickness of each layer and checking the uniformity of thickness and/or flatness of the interface are often done using recorded images of the materials. Evaluations can be made from the cross-sectional TEM/STEM images by accurately determining the averaged interface position between two different layered materials. In relation to the determination of the interface position in the HR atomic imaging, analysis by the multi- slice simulation (MSS) method can be applied for the target measurement, if the atomic structural models can be constructed. However, in real materials, there are a lot of cases when they cannot, such as: — the interface between amorphous layers, or layers of amorphous substance and crystal; — the interface recorded in low-resolution image in which the atomic columns cannot be identified: — for very thick single-layered material; — for thick multi-layered material. This document gives the method to determine the averaged interface position using a differential processing of the accumulated intensity profile obtained from the ROI set in the cross-sectional TE

Scope: This document specifies a procedure for the determination of the averaged interface position between two different layered materials recorded in the cross-sectional image of the multi-layered material. This document does not apply for determining the simulated interface of the multi-layered materials expected through the multi-slice simulation (MSS) method. This document is applicable to the cross-sectional images of multi-layered materials recorded using a transmission electron microscope (TEM) or a scanning transmission electron microscope (STEM) and cross- sectional elemental mapping images using an energy dispersive X-ray spectrometer (EDS) or an electron energy loss spectrometer (EELS). This document is also applicable to digitized images recorded on an image sensor built into a digital camera, a digital memory set in the PC or an imaging plate, where the digitalized image is obtained by converting an analogue image recorded on photographic film using an image scanner.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20263-2024 PDF

ISO 20263-2024 PDF

$129.00 $258.00