ISO TR 6049-2026 PDF

ISO TR 6049-2026 PDF

Hydraulic fluid power-Procedures used to certify the standard reference material SRM 2806d used in ISO 11171

$113.50 $227.00 -50%
Product Code: ISO TR 6049
Stock In Stock
Edition: 1.
Published: 09/2026
Number of Pages: 42
File Size: 1 file, 4.4 MB

Available Options

Product Description

Hydraulic fluid power — Procedures used to certify the standard reference material SRM 2806d used in ISO 11171

Introduction: NIST Standard Reference Material (SRM) 2806d is intended for use as a reference material for calibrating liquid particle sizing instruments, especially automatic optical particle counters. The fluid power industry estimates that about 80 % of all hydraulic failures are due to particulate contamination in the hydraulic fluid. Equipment failure is costly in terms of repairs, lost productivity, safety, and waste generation. Particle counters are routinely used to monitor fluid cleanliness in operating systems and to assess cleanliness of equipment coming off production lines as well as of individual components. SRM 2806d is a particle counter calibrant for liquid suspensions and a required reference material for ISO 11171[1]. Industries impacted by SRM 2806d include hydraulics industry, aerospace, automotive, ship, petroleum and lubricant, gas, power generation, filter manufacturers and the military. SRM 2806d is a National Institute of Standards and Technology (NIST) certified standard reference material. “NIST certified value is a value for which NIST has the highest confidence in that all known or suspected sources of bias and imprecision have been considered. For NIST to issue an SRM, the reference material at a minimum must have certain properties: a) the material must be homogenous; b) the material must be stable over a suitable length of time; c) some property of the material to be certified by NIST, a measurand, must be determined with utmost care, usually by employing t

Scope: This document describes the criteria and procedures used by the United States National Institute of Standards and Technology (NIST) to certify the calibration material SRM 2806d, which is used in the primary calibration of liquid automatic particle counters (APCs). SRM 2806d is a suspension of SAE 5 - 80 μm test dust in hydraulic fluid with a cumulative particle concentration determined through a consensus measurement processes, interlaboratory study (ILS), utilizing APCs. The original projected area equivalent diameters for SRM 2806 were certified using a scanning electron microscope (SEM) and image analysis techniques traceable to the meter through the NIST line scan interferometer.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TR 6049-2026 PDF

ISO TR 6049-2026 PDF

$113.50 $227.00