ISO TR 6336-30-2022 PDF

ISO TR 6336-30-2022 PDF

Calculation of load capacity of spur and helical gears-Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5

$60.00 $120.00 -50%
Product Code: ISO TR 6336-30
Stock In Stock
Edition: 2.
Published: 12/2022
Number of Pages: 70
File Size: 1 file, 5 Bytes

Available Options

Product Description

Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 30: Exemples d'application de l'ISO 6336 parties 1, 2, 3, 5

Introduction: The ISO 6336 series consists of International Standards, Technical Specifications (TS) and Technical Reports (TR) under the general title Calculation of load capacity of spur and helical gears (see Table 1). — International Standards contain calculation methods that are based on widely accepted practices and have been validated. — TS contain calculation methods that are still subject to further development. — TR contain data that is informative, such as example calculations. The procedures specified in ISO 6336-1 to ISO 6336-19 cover fatigue analyses for gear rating. The procedures described in ISO 6336-20 to ISO 6336-29 are predominantly related to the tribological behaviour of the lubricated flank surface contact. ISO 6336-30 to ISO 6336-39 include example calculations. The ISO 6336 series allows the addition of new parts under appropriate numbers to reflect knowledge gained in the future. Requesting standardized calculations according to ISO 6336 without referring to specific parts requires the use of only those parts that are designated as International Standards (see Table 1 for listing). When requesting further calculations, the relevant part or parts of ISO 6336 need to be specified. Use of a Technical Specification as acceptance criteria for a specific design needs to be agreed in advance between manufacturer and purchaser. Table 1 — Overview of ISO 6336 Calculation of load capacity of spur and helical gears Internation al Standard Technical Specifica tion Technical R

Scope: This document presents worked examples that apply exclusively the approximation methods for the determination of specific influential factors, such as the dynamic factor, Kv, and the load distributions factors KHα, KHβ, etc., where full analytical calculation procedures are provided within the referenced parts of ISO 6336. Worked examples covering the more advanced analysis techniques and methods are not applicable to this document. The example calculations presented in this document are provided for guidance on the application of ISO 6336-1:2019, ISO 6336-2:2019, ISO 6336-3:2019 and ISO 6336-5:2016. Any of the values, safety factors or the data presented do not represent recommended criteria for real gearing. Data presented within this document are for the purpose of aiding the application of the calculation procedures of ISO 6336-1, ISO 6336-2, ISO 6336-3 and ISO 6336-5.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TR 6336-30-2022 PDF

ISO TR 6336-30-2022 PDF

$60.00 $120.00