RTCA DO-253D-2017 PDF
Minimum Operational Performance Standards for GPS Local Area Augmentation System Airborne Equipment
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
Introduction This document contains minimum operational performance standards (MOPS) for airborne navigation equipment using the Global Positioning System (GPS) augmented by the Local Area Augmentation System (LAAS). These standards are partially derived from the requirements specified in RTCA/DO-245(), Minimum Aviation System Performance Standards (MASPS) for the Local Area Augmentation System (LAAS) . Additional requirements have been derived by analysis of operational intent and direct allocation of performance requirements between airborne and ground systems. Throughout this document, the term “LAAS” is used as a generic reference to ground-based augmentation systems (GBAS) as defined by the International Civil Aviation Organization (ICAO), as the requirements in this standard are intended to comply with the ICAO Standards and Recommended Practices (SARPs) for the GBAS aircraft element. Note : This MOPS was developed in conjunction with the ICAO Annex 10 Volume I SARPs (through Amendment 91). The shorter notation “ICAO Annex 10” is used in this document to refer to the SARPs. The standards in this document define minimum performance requirements, functions and features for LAAS airborne equipment to support multiple types of service that are intended to support precision approach operations and guided takeoff for all weather minimums. This standard also covers the computation and output of position, velocity, and time (PVT) to support area navigation and other applications. Note : The requirements for area navigation systems continue to evolve. Applicable standards include RTCA/DO-236(), RTCA/DO-229(), RTCA/DO-187() [as amended by TSO-C115()] and RTCA/DO-316(). Compliance with these standards by manufacturers, installers and users is recommended as a means of assuring that the equipment will satisfactorily perform its intended functions under conditions encountered in routine aeronautical operations. The regulatory application of these standards is the responsibility of appropriate government agencies. The Federal Aviation Administration (FAA) and the European Aviation Safety Agency (EASA) have published two Technical Standard Orders (TSO) for GPS/LAAS equipment, one for the LAAS VHF Data Broadcast (VDB) receiver function (TSO/ETSO-C162) and another for the LAAS Position And Navigation (PAN) function (TSO/ETSO-C161). These TSOs and ETSOs do not currently address GBAS Approach Service Type D (GAST D). It is expected that regulators will use this MOPS for authorizations with GAST D. The VDB Adjacent Channel interference requirements specified in this MOPS are harmonized with the ICAO Annex 10 GBAS SARPs. The ICAO NSP Spectrum Working Group (SWG), with support from RTCA SC-159, is updating the GBAS SARPs frequency compatibility criteria that are intended to be effective in November 2020. It is intended that this MOPS remain harmonized with the ICAO Annex 10 GBAS SARPs, including changes to the avionics D/U requirements that may result from updating the GBAS SARPs frequency compatibility criteria. Refer to Section K.5.2.2 in Appendix K for further details. The word "equipment", as used in this document, includes all components or units necessary (as determined by the equipment manufacturer or installer) to properly perform its intended function. In this document, the term “shall” is used to indicate requirements. An approved design would comply with every requirement, which can be assured by inspection, test, analysis, or demonstration. The term “must” is used to identify items which are important but are either duplicated somewhere else in the document as a “shall”, or are considered to be outside the scope of this document. The term “should” is used to denote a recommendation that would improve the LAAS equipment, but does not constitute a minimum requirement. This document facilitates traceability by identifying each specific requirement with a requirement designator. The notation “[LAAS-xxx]”, where xxx is a three-digit number, identifies each specific requirement for traceability purposes. Section 1 of this document provides information and assumptions needed to understand the rationale for equipment characteristics and requirements stated in the remaining sections. It describes typical equipment applications and operational goals and forms the basis for the standards stated in Sections 2 through 4. Section 2 contains the equipment performance requirements and test procedures for the VDB receiver function and the PAN function. These standards define required performance under standard operating conditions and stressed physical environmental conditions. Section 3 describes those additional requirements and tests that ensure that the LAAS equipment performs its intended function in a particular installation. Tests for the installed equipment are included when performance cannot be adequately determined through bench testing. Section 4 describes the characteristics of installed LAAS equipment, and the expected pilot reactions to specified displays. Appendix A contains a listing of abbreviations and definition of terms used in this document. Appendix B lists requirements, by requirements number, that have changed from the prior version of this document. It also indicates requirements that have been added. Appendix C contains an example of Final Approach Path and deviation calculations. Appendix D defines the GPS interference environment for which the PAN equipment is required to operate. Appendix E describes the approach and positioning service volumes and the maximum distance for use of differential corrections. Appendix F is reserved. Appendix G defines rotorcraft specific requirements for LAAS equipment. It is noted that the PinS operations defined in Appendix G are based on GAST C. This MOPS was not developed to support rotorcraft operations based on GAST D. Appendix H discusses test considerations. Appendix I discusses GBAS Approach Service Types, Facility Classifications, Airborne Equipment Classifications, and Approach Facility Classifications. Appendix J gives an example of how airborne geometry screening requirements can be derived based on ground monitor requirements and airplane performance for one airplane integration. Appendix K provides the rationale for the VDB airborne receiver sensitivity and dynamic range requirements based upon the overall VDB system link budget. Appendix L describes how a ground station uses reference receivers and the broadcast Bvalue parameters corresponding to the H1 hypotheses to support GBAS aided inertial systems.



