RTCA DO-409-2026 PDF

RTCA DO-409-2026 PDF

Minimum Operational Performance Standards for Depiction of Navigational Information on Electronic Map Displays and for Electronic Aeronautical Chart Display

$375.00 $750.00 -50%
Publisher
Product Code: RTCA DO-409
Stock In Stock
Edition: 26#
Published: 03/10/2026
Number of Pages: 237
File Size: 1 file, 3.7 MB

Available Options

Product Description

PURPOSE AND SCOPE Introduction This document contains minimum operational performance standards (MOPS) for the graphical depiction of navigation information on electronic map displays (EMDs) and the display of aeronautical data on electronic aeronautical chart displays (EACDs). Flightcrews use EMDs for awareness of the aircraft/ownship position relative to other items the EMD depicts. The EMD can support, but not replace, the navigation and guidance information on the primary flight displays (PFD). This MOPS includes requirements for EMDs depicting the plan view (in-flight map), airport moving map display (surface), and vertical situation display (VSD) information.. Navigation information on an EMD can help the flightcrew identify the aircraft’s position with respect to flight plan routes, fixes, and NAVAIDs (such as VORs, NDBs, etc.), as well as in relation to items on the airport surface. The EMD depicts procedure routes in the terminal area for all instrument approach procedure types, including both Performance Based Navigation (PBN) and conventional procedures. The EMD can support RNP systems and RNP operations, specifically when the EMD provides a plan view map and displays the RNP system’s defined paths. Additionally, this MOPS assumes no changes to navigation specifications requirements for EMD systems. These standards specify EMD characteristics useful to equipment designers, manufacturers, installers, and users of an EMD meeting these standards. The requirements in this MOPS revision also include new minimum standards to support EACDs. Flightcrews use EACDs to display aeronautical data, including charts, enabling them to timely execute route planning, route monitoring and other requirements of aircraft navigation. This MOPS uses the term EACD to include reference to static/fixed aeronautical charts and data driven charts (DDC). DDC optimizes display of pertinent aeronautical chart information matching the unique characteristics of a flight, such as the category of aircraft and flight specific air traffic control clearances. This MOPS includes requirements for EACDs including the depiction of a plan view, profile view, reference information (chart textual information), and an aerodrome diagram. Like the EMD, the EACD supports but does not replace the navigation and guidance information on the aircraft’s PFD. This MOPS assumes no changes to operational requirements for carriage of aeronautical charts and these MOPS are intended to support operational approval for EACD (i.e., static/fixed, DDC, or a combination thereof) as a replacement for paper charts. These standards apply to EACDs using any display technology (see definitions in Section 1.8), and this MOPS also provides a path for concurrently implementing elements of EMD/EACD on a flight deck display in a combined format offering the flightcrew a single image. These standards specify EACD characteristics useful to equipment designers, manufacturers, installers, and users of an EACD meeting these standards. Compliance with this MOPS provides one means of assuring that EMDs and EACDs will perform their intended function(s) satisfactorily under all the conditions that routine aeronautical operations normally experience (see Intended Function(s) in Section 1.4). Regulatory application of these standards is the sole responsibility of the State regulator. Section 1.0 provides information on the purpose and scope of this MOPS to help one understand the rationale for EMD and EACD characteristics and standards in the following sections. This section also describes typical EMD and EACD applications and operational goals while establishing the basis for the minimum standards stated in Sections 2.0 through 3.0. To aid in better understanding of the standards, this section includes definitions and assumptions essential for proper understanding of the remainder of the document. Section 2.0 contains general guidance and minimum standards for EMDs and EACDs. These standards specify required performance under normal operating and environmental conditions. Section 2.1 contains requirements and general guidance for both EMD and EACD that may lack associated test procedures. Section 2.2 provides overarching requirements for all EMDs, including the plan view map, airport map, and vertical situation displays (VSDs). While requirements in Section 2.3 apply to the plan view map display, requirements in Section 2.4 apply only to AMMDs; requirements in Section 2.5 apply only to the VSD. Requirements in Section 2.6 apply to EACD. Note: EACD requirements build upon a similar construct to those for EMD (i.e., plan view, airport map, and vertical situation displays). Yet, Section 2.6 requirements solely reference and leverage requirements appropriate for EACD. Section 2.7 includes environmental tests and equipment performance requirements, and Section 2.8 recommends the bench test requirements necessary to demonstrate EMD and EACD compliance with the minimum standards. Section 3.0 describes manufacturer’s considerations for installed equipment performance and references source documents for installation guidance. Section 4.0 describes the operational performance characteristics for equipment installations and the conditions assuring the user that EMD and EACD operations can be conducted safely and reliably in the expected operational environment. Appendix A is a list of abbreviations recommended for use with EMDs, EACDs and associated documents. Appendix B contains a glossary of terms and acronyms. Appendix C contains a bibliography and a list of all references cited in this document. Appendix D contains a list of all “shall” requirements in the body of the document (summarized for the convenience of the applicant and test team). Appendix E contains guidance on the use of color. Appendix F contains guidance for static/fixed charts on an EACD. Appendix G contains standardized symbols. Appendix I contains the Minimum Information Catalog (MIC). Appendix J contains acceptable means for data assurance related to the display of DDC Hazardous Information (DHI). Appendix K contains references related to decluttering. The acronyms EMD and EACD include references to all components and features necessary to properly perform their intended function(s). This MOPS’ system characteristics for the design and implementation of optional features of EMDs and EACDs only apply when the manufacturer implements the optional feature(s). This MOPS also includes descriptions of characteristics of the operational environment that these minimum standards support.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
RTCA DO-409-2026 PDF

RTCA DO-409-2026 PDF

$375.00 $750.00