RTCA B-15-2001 PDF
RTCA Task Force 4 – Certification Implementation Plans and Responsibilities Final Report of the RTCA Certification Steering Committee
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
INTRODUCTION Four overarching issues were identified in the RTCA Task Force 4 Report and reflected in the Certification Steering Committee charter. The issues are: 1. Technology development and associated product cycle times have outpaced the applicable FAA regulations, policy, guidance, and oversight capacity. 2. Under current practice, the time and cost to market for new technology CNS/ATM products is prohibitive to the FAA’s National Airspace System (NAS) modernization plans and priorities. 3. The lack of international agreements concerning the interoperability of CNS/ATM products and the harmonization of applicable regulations is a barrier to definition of International Airspace System (INAS) operations and to any significant development or certification cost efficiencies for the associated products and systems. 4. Current methods, policies and practices do not support the types of operations necessary for efficient use of the INAS by the aviation community. The situation will get worse unless changes are made. Responses to the Task Force 4 report, from both FAA and industry leadership affirmed these issues, together with the need to match an implementation program with INAS modernization priorities. The objective of the Task Force 4 recommendations are to realize operational benefits with improvements in the cost and schedule of the certification process, particularly for CNS/ATM products, while maintaining or improving today’s level of operational safety. The implementation processes should incorporate human factors design considerations and enhance international interoperability. It is recognized that institutionalizing changes is necessarily a long-term endeavor. However, this report identifies specific near term actions that have been or can be taken, and which provide a roadmap to facilitate a transition to improved methods of FAA oversight, certification service and operational authorization and use. Three Working Groups were formed to address the various aspects of the recommendations. WG-1 Operational Concepts and Procedures Context — The INAS is a complex environment that must accommodate the needs of a wide range of users from scheduled air carriers to personal and sport aviation. Growth in air traffic and public safety perspectives exerts forces on the operations conducted in the INAS. The Air Traffic Services (ATS) that support the INAS are continuously being assessed to determine if the level of service can support the future need of the aviation community. Technical and functional obsolescence in some areas is dictating either a change in technology or change in methodology. The aircraft manufacturing and equipage industry is attempting to match required operational functionality with evolving technology. Collectively, these forces produce a very dynamic environment. The user community expects flight operations that allow safe and efficient air commerce and public use. Product manufacturers expect clear definition of the functions necessary to conduct those operations. The management of the use of airspace by the FAA, and other oversight agencies, should focus on the procedures necessary for orderly access to, and operation within the INAS. Because of the dynamics of the air space, the creation and modification of operational procedures must be a continuous process. The FAA, and other national or regional Civil Aviation Authorities (CAAs), should implement changes necessary to focus on the development and maintenance of a means to address the following goals and their resultant operational benefits, as described in the Task Force 4 report: • Establish an organizational framework to provide a functional focus for users, industry and other government agencies. • Allow and encourage communications to support the development of operational and technical rationale necessary to formulate suitable policy and guidance consistent with regulatory and industry needs. • Expedite development of procedures and 3D and 4D operational concepts such as RNAV, RNP, available in current avionics, but underutilized. • Respond promptly to operational requirements with appropriate operational concepts when the concepts can be supported by technical capability. • Coordinate concepts of operations with operational, airworthiness and procedural certification policy. • Coordinate with industry to reduce the number of committees and forums devoted to operational concepts, certification basis and technical standardization. Work Group 1 addressed Task Force 4 Recommendations 1, 8, 9 and 10. WG-2 End-to-End Operation and System Requirements Context — As the present air traffic system has evolved, various ground and airborne systems have been implemented to conduct operations and to increase safety margins. Efficient use of the air space suggests the need for more flexible operation of aircraft to accomplish capacity, efficiency and workload objectives. Technology enhancements help promote higher levels of operational capability and greater integration of functions to reduce cost and improve reliability. An end to end perspective is necessary to appreciate the relationships between the various ground, air and space components and the interface between the human participants and the supporting systems. Only such an inclusive view can properly assess the levels of performance and integrity that are appropriate for each individual component. Without such a perspective, functional specifications may become disproportionately stringent such that resulting equipment costs are driven up with no corresponding increase in capability or safety margin. Unnecessarily stringent requirements can also preclude the promulgation of positive safety features due to cost considerations. Incorporating an end to end perspective in the charter of the proposed organizational structure for operational capabilities should institutionalize closer coordination between the functional branches of the agencies. The following are associated goals and their resultant benefits, as described in the Task Force 4 report: • Establish a system engineering discipline to consider the overall performance requirements in the context of the operational requirements and to allocate safety budgets appropriate to the various elements that contribute to the operation. • The agencies and industry should coordinate to produce standards and processes for both ground system and airborne system elements appropriate to their contribution to the operational function. • Implement multi-tiered airworthiness requirements to achieve safety objectives at reasonable cost. • Incorporate human performance considerations in standards for system operation, design and airworthiness approval. • The agencies and industry should utilize advanced system deployment "trials" as a technique to gain in-service experience quickly and provide feedback regarding operational concepts. Work Group 2 addressed Task Force 4 Recommendations 2, 3, 4 and 7. WG-3 Organizational Certification and Oversight Context — The projected growth of aviation operations and the products to enable that growth forecast an enormous need for operational authorization and certification service. The current practice of direct agency involvement in each operational and product approval has become an impediment to this growth. The current practice should be replaced with organizational certification of operators and product manufacturers, modeled after current practice in European states. Providing oversight through organizational certification, as considered under the Certified Design Organization (CDO) and Certified Design and Production Organization (CDPO) initiatives, should focus on the following goals and their resultant benefits, as described in the Task Force 4 report: • Establish a process where authorities and applicants come to an early and clear agreement on their respective roles, responsibilities, expectations, schedules, and standards to be used in certification projects. • Construct and apply this process to airborne and ground equipment suppliers, to facilitate approval of their components and processes independent of any specific aircraft Type Certificate or Supplemental Type Certificate (TC/STC) project. • Enhance the designee program to improve timeliness of approvals. • Ensure the proper application of rules and policy and distinguish between airworthiness objectives and operational procedures. • Provide for self-certification of the manufacturing process for STC holders (similar to that of TSO). Work Group 3 addressed Task Force 4 Recommendations 5, 6, 11, 12, 14 and 15. During the work program, the Working Groups identified opportunities to: • Minimize the number of rules and advisory material • Harmonize current rules, policies and criteria • Assure compatibility on any new rules, policies and criteria for new functionality All Work Groups were asked to consider the concepts of Task Force 4 Recommendation 13 – Rule Harmonization, in their work programs.



