RTCA DO-229F-2020 PDF
Minimum Operational Performance Standards (MOPS) for Global Positioning System/Satellite-Based Augmentation System Airborne Equipment
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
Introduction This document contains Minimum Operational Performance Standards (MOPS) for airborne navigation equipment (2D and 3D) using the Global Positioning System (GPS) augmented by Satellite-Based Augmentation Systems (SBAS); which, in the U.S. is the Wide Area Augmentation System (WAAS). DO-229 only provides standards for single frequency airborne navigation equipment. A separate document will be created in the future to address standards for dual frequency equipment. These standards are intended to be applicable to other SBAS providers, such as European Geostationary Navigation Overlay Service (EGNOS), Japan’s Multi-functional Transport Satellite (MTSAT) Satellite-based Augmentation System (MSAS) and India's GPS Aided Geo Augmented Navigation System (GAGAN). This new version of the Minimum Operational Performance Standards for Global Positioning System/Satellite-Based Augmentation System Airborne Equipment systems has been produced to introduce requirements tags. This will facilitate the comparison of these single frequency, GPS only requirements with the future dual frequency, multi-constellation requirements. On very few, specific cases, editorial clarifications of a requirement have been introduced. This version of the document is technically equivalent to RTCA DO-229E. In this document, the term “shall” is used to indicate requirements. An approved design should comply with every requirement, which can be assured by inspection, test, analysis, or demonstration. The term “must” is used to identify items that are important but are either duplicated somewhere else in the document as a “shall”, or are considered to be outside the scope of this document. The term “should” is used to denote a recommendation that would improve the SBAS equipment, but does not constitute a requirement. The standards define minimum performance, functions and features for SBAS-based sensors that provide position information to a multi-sensor system or separate navigation system. They also address SBAS-based Area Navigation (RNAV) equipment to be used for the en route, terminal, and Lateral Navigation (LNAV) phases of flight. These standards are based upon a nominal allocation of the aircraft-level requirements in RTCA/DO-236(latest revision), Minimum Aviation System Performance Standards: Required Navigation Performance for Area Navigation , accounting for the unique issues associated with SBAS and Global Navigation Satellite System (GNSS) navigation service and minimizing the need for pilot training. These standards also define performance, functions and features for equipment that satisfies the requirements for Lateral Navigation/Vertical Navigation (LNAV/VNAV), Localizer Performance without vertical guidance (LP), and Localizer Performance with Vertical guidance (LPV) instrument procedures. The standards cover SBAS-based equipment that is designed to serve combinations of the above phases of flight. Compliance with these standards by manufacturers, installers and users is recommended as one means of assuring that the equipment will satisfactorily perform its intended functions under conditions encountered in routine aeronautical operations, and will ensure a basic compatibility with the requirements defined in RTCA/DO-236(latest revision). Manufacturers and operators who elect to comply directly with the requirements of RTCA/DO-236(latest revision) as part of an aircraft certification (type certificate or supplemental type certificate) may bypass these RNAV standards, but are not expected to be eligible for a Class Gamma Technical Standard Order (TSO) authorization. The regulatory application of these standards is the responsibility of appropriate government agencies. In the United States, the Federal Aviation Administration (FAA) has published a Technical Standard Order (TSO) for GPS/WAAS equipment to reference the requirements and bench test procedures in Section 2. The word “equipment”, as used in this document, includes all components or units necessary (as determined by the equipment manufacturer or installer) to properly perform its intended function. For example, the airborne “equipment” may include: sensor(s), a computer unit, an input-output unit that interfaces with existing aircraft displays/systems, a control unit, a display, shock mount(s), etc. In the case of this example, all of the foregoing components or units constitute the “equipment”. It should not be inferred from this example, however, that all GPS/SBAS navigation equipment will necessarily include all of the foregoing components or units. The particular components of GPS/SBAS equipment will depend upon the design used by the equipment manufacturer, subject to the constraint that the equipment must meet the applicable requirements of this MOPS. Section 1 of this document provides information and assumptions needed to understand the rationale for equipment characteristics and requirements stated in the remaining sections. It describes typical equipment applications and operational goals and forms the basis for the standards stated in Sections 2. Section 2 contains the performance requirements. When measured values of equipment performance could be a function of the measurement method, this section also defines standard test conditions as well as testing methods. Section 2 contains the minimum performance standards for the equipment. These standards define required performance under standard operating conditions and stressed physical environmental conditions. It also details the recommended test procedures necessary to demonstrate compliance. Section 3 provides references to guidance material for installed equipment performance. Section 4 provides references to guidance material describing SBAS equipment operational characteristics. Appendices A through D are normative. Specifically, Appendix A contains the SBAS signal specification, Appendix B contains GPS assumptions, Appendix C describes the standard interference environment, and Appendix D defines the database record for approaches that require a Final Approach Segment (FAS) data block. Appendix E includes a description of the baseline weighted least squares algorithm. It also includes an example means of implementing the navigation system error algorithm. Appendix F and G describe additional SBAS capabilities that are not required by the MOPS. Appendix F describes capabilities that may be considered for ADS-B. Appendix G describes the requirements and test procedures for baro-aided FDE capability that is optional under this MOPS. Appendix H describes a recommended output standard for implementing functions required by this MOPS. But, the GPS/SBAS equipment is not required to use this method. Appendix I provides a typical mode switching processing flow diagram from the terminal area to the approach. The intent of appendix I is to aid in understanding the mode transition requirements. Appendix J describes required methods of calculating SBAS-based protection levels, based upon the data in the SBAS message. Appendix K provides a list of references concerning the fault detection and exclusion (FDE) algorithm that can be used during the en route, terminal area, and approach phases of flight as a reversionary mode for providing integrity. Appendix L describes an example method for making WGS-84 computations. Appendices M through Q are informative. Appendix M contains background material for bench tests. Appendix N provides guidance for determining Mean Sea Level height from WGS-84 coordinates and a reference to obtain the 1996 Earth Gravitational Model (EGM 96). Appendix O is a glossary and Appendix P provides flowcharts for the Ionospheric Grid Point (IGP) selection process. Appendix Q contains SBAS considerations for helicopters. Appendix R contains requirements and test procedures for tightly integrated GPS/inertial systems when fault-detection and exclusion is used to provide integrity. Any equipment that uses integrated GPS/inertial must meet the requirements and accomplish the test procedures of this appendix. Appendix S contains DO-229E process flow diagrams intended to be an example of the computation and logic flow that meets MOPS requirements for the possible operational modes. It is not intended to show all allowable implementations. Instead, a representative implementation is shown with references to the applicable MOPS requirements. Appendix T contains a description of the tool to determine Geostationary Satellite (GEO) bias error in receiver correlator designs. This tool can be used to demonstrate receivers meet the GEO bias requirement in this MOPS. Copies of the actual tool can be obtained through the RTCA Inc. online store at www.rtca.org and downloading the file: DO-229E GEO Bias Tool. Appendix U provides guidance for interfacing equipment conforming to this MOPS with ADS-B equipment. All classes of equipment compliant with this MOPS are expected to satisfy the requirements for initial U.S. ADS-B applications. Note: All equations in the appendices are labeled sequentially using the appendix letter identifier (e.g., [A-1], [A-2], etc.) so that the equations may be referenced .



