IEC 60034-27-2-2023 PDF

IEC 60034-27-2-2023 PDF

Rotating electrical machines-Part 27-2: On-line partial discharge measurements on the stator winding insulation

$239.59 $479.18 -50%
Product Code: IEC 60034-27-2
Stock In Stock
Edition: 1.0
Published: 12/2023
Number of Pages: 144
File Size: 1 file, 12 Bytes

Available Options

Product Description

Rotating electrical machines – Part 27-2: On-line partial discharge measurements on the stator winding insulation

Introduction: Partial Discharge (PD) on-line measurement of rotating electrical machines has gained widespread acceptance as it could reveal the presence of localized weak points of the stator insulation system and also various arcing and sparking phenomena. Nevertheless, it has emerged from several studies that not only are there many different methods of measurement in existence, but also the criteria and methods of analysing and finally assessing the measured data are often very different and not really comparable. Consequently, there is a need to have an International Standard (IS) to give defined guidelines to the users of on-line PD measurements to assess the condition of their insulation systems. On-line PD measurements are recorded with the rotating electrical machine experiencing all of the operating stresses; thermal, electrical, environmental and mechanical. Due to the realistic stress impact on the winding during measurement and due to the fact that the measurement is performed during all kinds of normal operation like base load and peak load, PD on-line testing could identify changes of the winding insulation system at a premature stage and enables real- time condition assessment as part of predictive maintenance strategies. PD trend evaluation and comparisons with machines of similar design and similar insulation system measured under similar conditions, using the same measuring equipment, are recommended to ensure reliable assessment of the condition of the stator winding in

Scope: This part of IEC 60034-27 deals with on-line PD measurements and provides a common basis with standardized procedures if possible for: measuring techniques and instruments; the arrangement of the installation; normalization and sensitivity assessment; measuring procedures; noise reduction; the documentation of results; the interpretation of results; with respect to partial discharge on-line measurements on the stator winding insulation of non-converter driven rotating electrical machines with rated voltage of 3 kV and up. This document covers PD measuring systems and methods detecting electrical PD signals. The same measuring devices and procedures can also be used to detect electrical sparking and arcing phenomena.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-27-2-2023 PDF

IEC 60034-27-2-2023 PDF

$239.59 $479.18