IEC 60034-30-3-2024 PDF

IEC 60034-30-3-2024 PDF

Rotating electrical machines-Part 30-3: Efficiency classes of high voltage AC motors (IE-code)

$100.88 $201.76 -50%
Product Code: IEC 60034-30-3
Stock In Stock
Edition: 1.0
Published: 02/2024
Number of Pages: 50
File Size: 1 file, 1 Byte

Available Options

Product Description

Rotating electrical machines – Part 30-3: Efficiency classes of high voltage AC motors (IE-code)

Introduction: This document provides the global harmonization of energy-efficiency classes of three-phase cage induction motors with rated voltage above 1 000 V that are rated for direct online starting and fixed-speed operation at a 50 Hz or 60 Hz supply with sinusoidal voltage. For these motors, the demands of the power supply and of the driven equipment in many cases govern the design of the electrical machine. Due to the large size and power of high-voltage (HV) motors, these demands are more complex than for low-voltage motors and often limit the design. Vice versa, the properties of the electrical machine itself influence the grid considerably in many cases. In order to ensure an easy applicability of this document, the scope is limited to the most relevant applications, i.e. motors for driving the vast majority of pumps, fans, or compressors, which cover approximately 80 % to 90 % of all applications. Motors for special applications, e.g. for accelerating very high load inertia, for very low supply voltage during starting, for very low locked-rotor current or for accelerating against high load torque, are therefore out of the scope of this document. Despite this, the motor technology, namely rated voltage, method of cooling, locked-rotor current, have a significant influence on the achievable motor efficiency as well as the rated frequency, the rated power and the number of poles, and are considered when specifying the efficiency class. NOTE When specifying or designing a power driv

Scope: This part of IEC 60034 specifies efficiency classes for fixed-speed three-phase high-voltage cage induction motors in accordance with IEC 60034-1 that have a rated voltage exceeding 1 000 V, but not exceeding 11 kV; have a rated power from 200 kW to 2 000 kW; NOTE 1 Motors with rated power above 2 000 kW are produced in such small numbers and are designed and produced with a focus on achieving an optimum efficiency anyway, even though fulfilling increasingly special requirements that assigning efficiency classes would be an additional effort without the result of any countable energy saving. have two, four or six poles; are rated for single-speed line-operation; are intended for direct-on-line starting at rated or at reduced voltage and rated frequency; are constructed to any degree of protection; are designed for cooling methods IC411, IC511, IC611, IC01 or IC81W; are capable of continuous operation at their rated operating point (torque/power, speed) with a temperature rise within the specified insulation temperature class; NOTE 2 Most motors covered by this document are rated for duty type S1 (continuous duty). However, some motors that are rated for other duty cycles are still capable of continuous operation at their rated power and these motors are also covered. are rated for any ambient temperature or coolant temperature within the range of – 20 °C to + 60 °C; NOTE 3 Motors rated for temperatures outside the range – 20 °C and + 60 °C are considered to be of special construction and are consequently excluded from this document. are rated for an operating altitude up to 2 000 m above sea level; NOTE 4 The rated efficiency and the efficiency class are based on a rating for altitudes up to 1 000 m above sea level. have a locked-rotor current Il at stand-still and supply with rated voltage and frequency before application of any IEC or agreed tolerance in the range Il / IN ≥ 4,5; are designed for a customer load torque during starting not exceeding an envelope with a minimum of 25 % of the rated torque at low speed and a square shape T ~ n2 up to a maximum load torque at full speed of 60 % of the rated torque in case of 2 pole motors or 100 % of the rated torqu

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-30-3-2024 PDF

IEC 60034-30-3-2024 PDF

$100.88 $201.76