IEC 60034-9 CMV-2021 PDF

IEC 60034-9 CMV-2021 PDF

Rotating electrical machines-Part 9: Noise limits (Commented Version)

$145.02 $290.03 -50%
Product Code: IEC 60034-9 CMV
Stock In Stock
Edition: 5.0
Published: 10/2021
Number of Pages: 68
File Size: 1 file

Available Options

Product Description

Rotating electrical machines – Part 9: Noise limits (Commented Version)

Introduction: Acoustic quantities can be expressed in sound pressure terms or sound power terms. The use of a sound power level, which can be specified independently of the measurement surface and environmental conditions, avoids the complications associated with sound pressure levels, which require additional data to be specified. Sound power levels provide a measure of radiated energy and have advantages in acoustic analysis and design.

Scope: This part of IEC 60034: specifies test methods for the determination of sound power level of rotating electrical machines; specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) rated speed not greater than 3 750 min–1 provides guidance for the determination of noise levels for a.c. cage induction motors supplied by converters. Excluded are noise limits for AC motors supplied by converters. For these conditions see IEC 60034-17 Annex B for guidance. The object of this document is to determine maximum A-weighted sound power levels, LWA in decibels, dB, for airborne noise emitted by rotating electrical machines of standard design, as a function of power, speed and load, and to specify the method of measurement and the test conditions appropriate for the determination of the sound power level of the machines to provide a standardized evaluation of machine noise up to the maximum specified sound power levels. This document does not provide correction for the existence of tonal characteristics. Sound pressure levels at a distance from the machine may be required in some applications, such as hearing protection programs. Information is provided on such a procedure in Clause 7 based on a standardized test environment. NOTE 1 This document recognizes the economic reason for the availability of standard noise-level machines for use in non-critical areas or for use with supplementary means of noise attenuation. NOTE 2 Where sound power levels lower than those specified in Table 1, Table 2 or Table 3 are required, these should be are agreed between the manufacturer and the purchaser, as special electrical, mechanical, or acoustical design may involve additional measures.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-9 CMV-2021 PDF

IEC 60034-9 CMV-2021 PDF

$145.02 $290.03