IEC 60068-3-11-2007 PDF

IEC 60068-3-11-2007 PDF

Environmental testing-Part 3-11: Supporting documentation and guidance-Calculation of uncertainty of conditions in climatic test chambers

$163.93 $327.86 -50%
Product Code: IEC 60068-3-11
Stock In Stock
Edition: 1.0
Published: 05/2007
Number of Pages: 72
File Size: 1 file, 469 Bytes

Available Options

Product Description

Environmental testing – Part 3-11: Supporting documentation and guidance – Calculation of uncertainty of conditions in climatic test chambers

Introduction: This part of IEC 60068 provides guidance for analysing uncertainties of temperature and humidity in climatic test chambers. It has been written for technicians, engineers and managers in environmental testing, and for anyone who needs to understand the results of environmental tests. The performance of climatic test chambers is a key concern in environmental test engineer- ing. To comply with any test specification, the performance of the chamber needs to be characterized to decide whether the generated conditions fall within the specified limits. This characterization can be a difficult task, and the analysis of uncertainties in chamber performance is often surrounded by confusion. This publication is intended to ease that process. In what follows, the concept of uncertainty of measurement is introduced first and then the significance of tolerance discussed. Aspects of humidity and temperature measurement are considered, followed by methods for determining and combining uncertainties. The cases of both calibrating an empty chamber and of measuring conditions in a loaded chamber are considered. Finally, detailed guidance and worked examples are given for analysing results to give estimates of uncertainty in the measured performance.

Scope: This part of IEC 60068 demonstrates how to estimate the uncertainty of steady-state temperature and humidity conditions in temperature and humidity chambers. Since this is inextricably linked to the methods of measurement, these are also described. This standard is equally applicable to all environmental enclosures, including rooms or laboratories. The methods used apply both to temperature chambers and combined temperature and humidity chambers. This standard is meant to help everyone using climatic test chambers. Those already familiar with uncertainty of measurement will find it useful for guidance on typical sources of uncertainty and how they should be quantified and combined. It is also intended to assist the first-time or occasional user who has little or no knowledge of the subject. To discuss uncertainty, it is important first to understand what is being measured or characterized. The calibration or characterization of the performance of a chamber is concerned with the humidity and temperature of the air in the chamber, as experienced by the item under test, at a given set point. This should not be confused with characterizing or calibrating the chamber sensor, which is a separate matter.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Overall uncertainty of relative humidity measurement
  • 10.1 Uncertainty of temperature measurement at each sensor point
  • 10.2 Uncertainty of the relative humidity measurement
  • 11 Anomalous data and presentation of results
  • 11.1 Average case analysis
  • 11.2 Worst case analysis

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60068-3-11-2007 PDF

IEC 60068-3-11-2007 PDF

$163.93 $327.86