IEC 60076-14-2013 PDF

IEC 60076-14-2013 PDF

Power transformers-Part 14: Liquid-immersed power transformers using high-temperature insulation materials

$211.22 $422.43 -50%
Product Code: IEC 60076-14
Stock In Stock
Edition: 1.0
Published: 09/2013
Number of Pages: 124
File Size: 1 file, 1 Byte

Available Options

Product Description

Power transformers – Part 14: Liquid-immersed power transformers using high-temperature insulation materials

Introduction: This part of IEC 60076 standardizes liquid-immersed transformers that use high-temperature insulation. As a system, the solid insulation may encompass a broad range of materials with varying degrees of thermal capability. The insulating and cooling liquids also vary substantially, ranging from mineral oil to a number of liquids that also have a range of thermal capability. This international standard is not intended to stand alone, but rather builds on the information and guidelines documented in other parts of the IEC 60076 series. Accordingly, this document follows two guiding principles. The first principle is that liquid-immersed transformers are well known and are well defined in other parts of this series and therefore, the details of these transformers are not repeated in this international standard, except where reference has value, or where repetition is considered appropriate for purposes of emphasis or comparison. The second principle is that the materials used in normal liquid-immersed transformers, typically kraft paper, pressboard, wood, mineral oil, paint and varnish, which operate within temperature limits given in IEC 60076-2, are well known and are considered normal or conventional. All other insulation materials, either solid or liquid that have a thermal capability higher than the materials used in this well-known system of insulation materials are considered high-temperature. Consequently, this standard or normal insulation system is defined as the “conve

Scope: This part of IEC 60076 applies to liquid-immersed power transformers employing either high- temperature insulation or combinations of high-temperature and conventional insulation, operating at temperatures above conventional limits. It is applicable to: power transformers in accordance with IEC 60076-1; convertor transformers according to IEC 61378 series; transformers for wind turbine applications in accordance with IEC 60076-16; arc furnace transformers; reactors in accordance with IEC 60076-6. This part of IEC 60076 may be applicable as a reference for the use of high-temperature insulation materials in other types of transformers and reactors.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60076-14-2013 PDF

IEC 60076-14-2013 PDF

$211.22 $422.43