Railway Applications – Electric equipment for rolling stock – Part 3: Electrotechnical components – Rules for DC circuit-breakers
Scope: In addition to the general requirements of IEC 60077-2, this part of IEC 60077 gives the rules for circuit-breakers, the main contacts of which are connected to DC power and/or auxiliary circuits. The nominal voltage of these circuits does not exceed 3 000 V DC according to IEC 60850. This part of IEC 60077, together with IEC 60077-2, states specifically: a) the characteristics of the circuit-breakers; b) the service conditions with which circuit-breakers complies with reference to: operation and behaviour in normal service; operation and behaviour in the case of short circuit; dielectric properties; c) the tests for confirming the compliance of the components with the characteristics under the service conditions and the methods to be adopted for these tests; d) the information to be marked on, or given with, the circuit breaker. NOTE 1 Circuit-breakers which are dealt with in this document can be provided with devices for automatic opening under predetermined conditions other than those of overcurrent, for example, under-voltage and reversal of power flow direction. This document does not deal with the verification of operation under such predetermined conditions. NOTE 2 The incorporation of electronic components or electronic sub-assemblies into electrotechnical components is now common practice. Although this document is not applicable to electronic equipment, the presence of electronic components does not provide a reason to exclude such electrotechnical components from the scope. Electronic sub-assemblies included in circuit-breakers comply with the relevant document for electronics (IEC 60571). NOTE 3 Certain of these rules, after agreement between the user and the manufacturer, are used for electro- technical components installed on vehicles other than rail rolling stock such as mine locomotives, trolleybuses, etc. In this case, particular additional requirements can be necessary. This document does not cover: e) multi-connection of electro-technical components to achieve a particular duty; f) industrial circuit-breakers which complies with IEC 60947-2; g) DC circuit-breakers for fixed installations which complies with IEC 61992-2. For f) and g), in order
Contents: