IEC 60079-29-3-2014 PDF

IEC 60079-29-3-2014 PDF

Explosive atmospheres-Part 29-3: Gas detectors-Guidance on functional safety of fixed gas detection systems

$186.00 $371.99 -50%
Product Code: IEC 60079-29-3
Stock In Stock
Edition: 1.0
Published: 03/2014
Number of Pages: 102
File Size: 1 file, 4 Bytes

Available Options

Product Description

Explosive atmospheres – Part 29-3: Gas detectors – Guidance on functional safety of fixed gas detection systems

Introduction: Fixed gas detection systems have been used for many years to perform safety instrumented functions. Like any instrumented system, a fixed gas detection system commonly comprises of a single or multiple gas detector input(s), a control unit and a single or multiple final element(s) or output(s). Additional peripheral equipment may be incorporated into a fixed gas detection system e.g. a gas sampling system or a gas conditioning system. If a fixed gas detection system, including any relevant peripheral equipment is to be effectively used for safety instrumented functions, it is essential that the total system achieves certain minimum standards and performance levels. It is important to understand that the number of sensing points and their appropriate location, their redundancy, the management of regular maintenance, specifically response checking or calibration, and other gas detection specific features (such as design of gas sampling systems) are all likely to have a far greater effect on the integrity of the overall Safety Instrumented System (SIS) than the required Safety Integrity Level (SIL) or SIL-capability of any of the individual functional units. This, however, does not exclude the requirement for each Safety Instrumented Function (SIF) to have a stand-alone functional integrity. This international standard addresses the minimum standards and performance levels of a fixed gas detection system which is based on the use of electrical, electronic or programmable electro

Scope: This International standard gives guidance for the design and implementation of a fixed gas detection system, including associated and/or peripheral gas detection equipment, for the detection of flammable gases/vapours and Oxygen when used in a safety-related application in accordance with IEC 61508 and IEC 61511. This International standard also applies to the detection of toxic gases. Other parts of this international standard and pertinent local, national and international standards separately specify the performance requirements of a gas detector and a gas detection control unit (logic solver). These standards are commonly known as Metrological Performance Standards and are concerned with the accuracy of the measured value, the overall system performance, but not the device or system integrity with respect to the safety function. This international standard applies to the integrity of the safety function. NOTE In certain jurisdictions, it can be a requirement for a Certification Body to certify the performance of equipment for the measurement of flammable gases, vapours, toxic gases and/or Oxygen used in life safety applications. This international standard sets out safety-related considerations of fixed gas detection systems, including associated and/or peripheral gas detection equipment in terms of the framework and philosophy of IEC 61508, and introduces the particular requirements demanded by a fixed gas detection system as shown in Figure 2. IEC 1060/14 Figure 2 − Related Safety Instrumented System Standards IEC 60079-29-3:2014 © IEC 2014 – 11 – This international standard does not consider the Safety Integrity Level SIL 4. SIL 4 is assumed to be unrealistic to be achieved for gas detection systems. NOTE 3 It is rare for any risk study to determine a Safety Integrity higher than SIL 2 for a fixed gas detection system. This international standard is applicable for fixed gas detection systems, which might consist of the following hardware functional units Gas sensor/transmitter Gas detection control unit (logic solver) Gas sampling (single and multiplexed streams) Gas conditioning Automatic gas calibration and adjustment Output module (if not part of the

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60079-29-3-2014 PDF

IEC 60079-29-3-2014 PDF

$186.00 $371.99