IEC 60100-1962 PDF

IEC 60100-1962 PDF

Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves

$138.71 $277.42 -50%
Product Code: IEC 60100
Stock In Stock
Edition: 2.0
Published: 01/1962
Number of Pages: 53
File Size: 0 files

Available Options

Product Description

Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves

Scope: This recommendation covers the measurement of direct interelectrode capacitances of tubes and valves within the conditions outlined in Clause 4 for the following classes: Receiving tubes and valves Cathode-ray tubes Gas tubes and gas-filled valves Phototubes, photocells and multiplier types High-power vacuum tubes and valves 1. Definitions In this recommendation the following definitions apply: 1.1 Element (of an electronic tube or valve). Any integral part of the tube or valve that contributes to its operation and to which external connections can be made. 1.2 Electrode (of an electronic tube or valve). A conducting element that performs one or more of the functions of emitting, collecting, or controlling by an electric field the movement of elec- trons or ions. 1.3 Filament (of an electronic tube or valve). A hot cathode (usually in the form of a wire or ribbon) which is heated directly by current flowing in it. 2. General rules for interconnections 2.1 The specified interelectrode capacitance shall be measured directly rather than derived from combinations of two or more individual capacitance measurements. In the measurement, elements to be excluded are connected to the reference earth. This is not to be confused with earthing in circuit applications. A connection which is not identified, for instance to a pin or lead marked "internal connection", shall be left floating. 2.2 When measuring cathode-ray tubes, the post-deflection accelerators (intensifier electrodes) are left floating. 2.3 When measuring tubes and valves with a metal base sleeve not connected internally, the metal base sleeve is left floating. 2.4 On all types where elements are connected to two or more pins or leads, all such pins or leads shall be connected together. 2.5 In those cases where two or more elements are declared to be internally connected, the major element is used to describe the combination. For example, the combination of a grid inter- nally connected to a cathode shall be regarded as a cathode in the tables of connections. 2.6 For directly-heated filament types, the filament is regarded as the cathode electrode. 2.7 In all cases, when stating capacitance values, it shall be

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60100-1962 PDF

IEC 60100-1962 PDF

$138.71 $277.42