Fixed resistors - Part 1: Terms and methods of test
Introduction: The specification system for fixed resistors for use in electronic equipment is structured in a hierarchical system as shown in Figure 1, consisting of the following specification types. Generic specification The generic specification covers all subjects mainly common to the family of fixed resistors for use in electronic equipment, such as terminology, methods of measurement and tests. Where the individual subjects require the prescription conditions or parameters specific to the particular sub-family or type of fixed resistor, such prescriptions are required to be given by one of the subordinate specifications. For the scope of fixed resistors, the numeric reference to the generic specification is IEC 60115-1. Sectional specification Sectional specifications cover all subjects additional to those given in the generic specification, which are specific to a defined sub-group of fixed resistors. These subjects normally are preferred values for dimensions and characteristics, additional test methods and relevant prescriptions for test methods given in the generic specification, prescriptions for sampling and for the preparation of specimen, recommended test severities and preferred acceptance criteria. The sectional specification also outlines the structure and scope of the test schedules which are to be applied in all subordinate detail specifications. For the scope of fixed resistors, the numeric references to the sectional specifications reach from IEC 60115-2 for leaded fix
Scope: This part of IEC 60115 is a generic specification and is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.
Contents:
- FOREWORD
- INTRODUCTION
- Scope