IEC 60216-1 CMV-2025 PDF

IEC 60216-1 CMV-2025 PDF

Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results (Commented Version)

$327.86 $655.72 -50%
Product Code: IEC 60216-1 CMV
Stock In Stock
Edition: 7.0
Published: 12/2025
Number of Pages: 102
File Size: 1 file, 2.3 MB

Available Options

Product Description

Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results (Commented Version)

Introduction: The listing of the thermal capabilities of electrical insulating materials, based on service experience, was found to be impractical, owing to the rapid development of polymer and insulation technologies and the long time necessary to acquire appropriate service experience. Accelerated ageing and test procedures were therefore required needed to obtain the necessary information. The IEC 60216 series [1] has been developed to formalize these procedures and the interpretation of their results. Physico-chemical models postulated for the ageing processes led to the almost universal assumption of the Arrhenius equations to describe the rate of ageing. Out of this arose the concept of the temperature index (TI) as a single-point characteristic based upon accelerated ageing data. This is the numerical value of the temperature in degrees Celsius at which the time taken for deterioration of a selected property to reach an accepted end-point is that specified (usually 20 000 h). NOTE The term Arrhenius is widely used (and understood) to indicate a linear relationship between the logarithm of a time and the reciprocal of the thermodynamic (absolute or kelvin) temperature. The correct usage is restricted to such a relationship between a reaction rate constant and the thermodynamic temperature. The common usage is employed throughout this document. The large statistical scatter of test data which was found, together with the frequent occurrence of substantial deviations from the ideal beh

Scope: This part of IEC 60216 specifies the general ageing conditions and procedures to be used for deriving thermal endurance characteristics and gives guidance in using the detailed instructions and guidelines in the other parts of IEC 60216. Although originally developed for use with electrical insulating materials and simple combinations of such materials, the procedures are considered to be of more general applicability and are widely used in the assessment of materials not intended for use as electrical insulation. In the application of this document, it is assumed that a practically linear relationship exists between the logarithm of the time required to cause the predetermined property change and the reciprocal of the corresponding absolute temperature (Arrhenius relationship). For the valid application of this document, no transition, in particular no first-order transition should, is expected to occur in the temperature range under study. Throughout the rest of this standard the term "insulating materials" is always taken to mean "insulating materials and simple combinations of such materials".

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60216-1 CMV-2025 PDF

IEC 60216-1 CMV-2025 PDF

$327.86 $655.72