Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 1: General requirements
Introduction: The IEC 60227 series, published under the general title Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V, consists of the following parts: IEC 60227-1: General requirements; IEC 60227-2: Test methods (withdrawn and replaced by IEC 63294); IEC 60227-3: Non-sheathed cables for fixed wiring; IEC 60227-4: Sheathed cables for fixed wiring; IEC 60227-5: Flexible cables (cords); IEC 60227-6: Lift cables and cables for flexible connections; IEC 60227-7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V. This part of IEC 60227, when used in conjunction with each of the other parts of the IEC 60227 series, forms the complete standard for the type of cable specified in the specific part.
Scope: This part of IEC 60227 applies to rigid and flexible cables with insulation, and sheath if any, based on polyvinyl chloride, of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V AC. NOTE For some types of flexible cables the term "cord" is used. The particular types of cables are specified in IEC 60227-3, IEC 60227-4, IEC 60227-5, IEC 60227-6 and IEC 60227-7. The code designations of these types of cables are provided in this document. The test methods specified in this document, IEC 60227-3, IEC 60227-4, IEC 60227-5, IEC 60227-6 and IEC 60227-7 are given in IEC 63294, IEC 60332-1-2 and in the relevant parts of the IEC 60811 series.
Contents:
- FOREWORD
- INTRODUCTION
- Scope