Scales and sizes for plotting frequency characteristics and polar diagrams
Introduction: Historically, on analogue level recorders, 1 dB was represented by 1 mm, 2 mm or 5 mm, corresponding to level ranges of 50 dB, 25 dB and 10 dB, respectively. One of these three level ranges was equal in length to 1 decade on the logarithmic frequency scale of the paper used for the plot, limiting the available aspect ratios. With the advent of computer-generated graphics, plots can now be of any size that is legible or enlarged on a display as necessary. A plot of the data may only represent a graphical summary that is convenient for communicating via a report or other publication where one does not wish to list out the entire data set. This further emphasizes the importance of the visual representation. Therefore, in order to gain an accurate impression from a graph in which a response is plotted as level (in decibels) or as an amplitude or percentage on a logarithmic y-axis versus frequency on a logarithmic scale, it remains important that the aspect ratio be standardized. Otherwise, a spectrum or response curve can be made to appear unduly flat or unduly steep by compression or expansion of one of the axes. The subject of interest is usually a frequency response or output spectrum that results from the application of an input spectrum to a device such as a microphone, amplifier, hearing aid, headphone, or loudspeaker, or alternatively, level differences for the response of these devices compared to a reference response. Analogous characteristics may be measured and plotted
Scope: This document specifies standard aspect ratios for logarithmic or level characteristics expressed in decibels versus a logarithmic frequency axis and ranges for the radius of polar diagrams of level. Applications include hard copy printouts, electronic files (e.g., PDF files), scientific publications, screen displays in computer programs and apps, as well as graphs in standards. Informative examples of graphs that conform to the requirements in this document are found in Annex A. Although outside the scope of this document, graphs with a linear y-axis versus logarithmic frequency (e.g., phase, group delay, etc.) often accompany the standard aspect ratio graphs of level described in the normative part of this document. These are described in informative Annex B.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 25 dB/decade (dB re. 20 µPa)
- 50 dB/decade