IEC 60268-17-1990 PDF

IEC 60268-17-1990 PDF

Sound System Equipment Part 17: Standard Volume Indicators

$25.22 $50.44 -50%
Product Code: IEC 60268-17
Stock In Stock
Edition: 1.0
Published: 09/1990
Number of Pages: 27
File Size: 1 file

Available Options

Product Description

Sound System Equipment Part 17: Standard Volume Indicators

Scope: This standard gives the characteristics to be specified, performance requirements and the relevant methods of measurement for electro- mechanical volume indicators. The concept of "volume" is a practical way of assigning a numerical value to the magnitude of electrical speech and music programme signals. Since the response of the meter movement of such an indicator to the rapidly varying programme voltage is greatly dependent upon its dynamic characteristics, a standard for volume measurements shall therefore include a specification of these characteristics. The term "vu" (pronounced "vee-you" and written with lower case letters) is used to express volume in terms of vu above or below a specified reference level. This standard does not deal with peak programme level meters which are the subject of IEC 268-10. 2 Definitions 2.1 "vu" is a quantitative expression of volume in an electrical circuit. 2.2 The standard volume indicator is a device for the indication of volume having the characteristics described in this standard. A standard volume indicator (or vu-indicator) consists of three parts: an indicating meter with a full-wave rectifier; an attenuator (adjustable loss); a fixed series resistor (fixed loss) . The reading is obtained by the algebraic addition of the value indicated by the meter and the value indicated on tI)e attenuator scale. 3 Reference indication The reference indication is the meter scale point marked 0 or 100 on the vu scale (see figure 3) .

Contents:

  • FOREWORD
  • 1 Scope
  • 4 Reference voltage
  • 5 Reference volume - Characteristics to be specified
  • 7 Amplitude-frequency response - Performance requirement
  • 8 Response time
  • 9 Overswing - Performance requirement
  • 10 Return time - Performance requirement
  • 14 Temperature range - Performance requirement
  • 15 Overload input level - Performance requirement
  • 18 Mounting on panels - Presence of magnetic material
  • 19 Mounting angle - Performance requirement
  • 1 - Connection of the standard volume indicator
  • 2 - Schematic diagram of the method of measurement of response
  • 3 - Scale of the standard volume indicator

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60268-17-1990 PDF

IEC 60268-17-1990 PDF

$25.22 $50.44