Electric Cables - Calculation of the Current Rating - Part 3-1: Operating Conditions - site Reference Conditions
Introduction: IEC 60287 has been divided into three parts and sections so that revisions of, and additions to, the document can be carried out more conveniently. Each part is subdivided into subparts which are published as separate standards. Part 1: Formulae for ratings (100 % load factor) and power losses Part 2: Formulae for thermal resistance Part 3: Sections on Operating conditions This part of IEC 60287-3 contains reference ambient temperatures and thermal resistivities of soil in various countries. Also in this section is an outline of the information required from the purchaser for the selection of the appropriate type of cable. Quantities related to the operating conditions of cables are liable to vary considerably from one country to another. For instance, with respect to the ambient temperature and soil thermal resistivity, the values are governed in various countries by different considerations. Superficial comparisons between the values used in the various countries may lead to erroneous conclusions if they are not based on common criteria: for example, there may be different expectations for the life of the cables, and in some countries design is based on maximum values of soil thermal resistivity, whereas in others average values are used. Particularly, in the case of soil thermal resistivity, it is well known that this quantity is very sensitive to soil moisture content and may vary significantly with time, depending on the soil type, the topographical and meteorological co
Scope: This part of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all alternating voltages, and direct voltages up to 5 kV, buried directly in the ground, in ducts, troughs or in steel pipes, both with and without partial drying-out of the soil, as well as cables in air. The term "steady state" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature, the surrounding ambient conditions being assumed constant. This section concerns reference operating conditions and selection of cable type. This document defines site reference conditions, however the general values are superseded by specific national requirements.
Contents:
- FOREWORD
- INTRODUCTION
- Scope