IEC 60317-0-5-2006 PDF

IEC 60317-0-5-2006 PDF

Specifications for Particular Types of Winding Wires - Part 0-5: General Requirements - Glass-Fibre Braided Resin or Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire

$100.88 $201.76 -50%
Product Code: IEC 60317-0-5
Stock In Stock
Edition: 2.0
Published: 11/2006
Number of Pages: 52
File Size: 1 file, 464 Bytes

Available Options

Product Description

Specifications for Particular Types of Winding Wires - Part 0-5: General Requirements - Glass-Fibre Braided Resin or Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire

Introduction: This part of IEC 60317 is one of a series, which deals with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) methods of test (IEC 60851); 2) specifications (IEC 60317); 3) packaging (IEC 60264).

Scope: This part of IEC 60317 specifies general requirements of glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire. The range of nominal conductor dimensions is given in the relevant specification sheet. When reference is made to a winding wire according to IEC 60317-39 or IEC 60317-40 mentioned under Clause 2, the following information is given in the description: reference to IEC specification; nominal conductor dimensions in millimetres (width × thickness); grade of coating and glass covering. The coating shall be characterised by the following grades of thickness: - BGL1, bare conductor with 1 braided layer of glass fibre - BGL2, bare conductor with 2 braided layers of glass fibre - grade 1 BGL1, enamelled grade 1 (grade 1) with 1 braided layer of glass fibre (BGL1) - grade 1 BGL2, enamelled grade 1 (grade 1) with 2 braided layers of glass fibre (BGL2) - grade 2 BGL1, enamelled grade 2 (grade 2) with 1 braided layer of glass fibre (BGL1) - grade 2 BGL2, enamelled grade 2 (grade 2) with 2 braided layers of glass fibre (BGL2)

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Cut-through
  • 11 Resistance to abrasion
  • 12 Resistance to solvents
  • 13 Breakdown voltage
  • 14 Continuity of insulation
  • 15 Temperature index
  • 16 Resistance to refrigerants
  • 17 Solderability
  • 18 Heat or solvent bonding
  • 19 Dielectric dissipation factor
  • 20 Resistance to transformer oil
  • 21 Loss of mass
  • 23 Pin hole test
  • 30 Packaging

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60317-0-5-2006 PDF

IEC 60317-0-5-2006 PDF

$100.88 $201.76