IEC 60317-18 (REDLINE + STANDARD)-2020 PDF

IEC 60317-18 (REDLINE + STANDARD)-2020 PDF

Specifications for particular types of winding wires-Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120

$42.88 $85.75 -50%
Product Code: IEC 60317-18 (REDLINE + STANDARD)
Stock In Stock
Edition: 4.0
Published: 06/2020
Number of Pages: 34
File Size: 1 file, 1.1 MB

Available Options

Product Description

Specifications for particular types of winding wires – Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120

Introduction: This part of IEC 60317 forms an element of a series of standards which deals with insulated wires used for windings in electrical equipment. It is composed of the following series: 1) Winding wires – Test methods (IEC 60851 series); 2) Specifications for particular types of winding wires (IEC 60317 series); 3) Packaging of winding wires (IEC 60264 series).

Scope: This part of IEC 60317 specifies the requirements of enamelled rectangular copper winding wires of class 120 with a sole coating based on polyvinyl acetal or polyvinyl formal resin, which may can be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements NOTE 1 A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. Class 120 is a thermal class that requires a minimum temperature index of 120 and a heat shock temperature of at least 155 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. NOTE 2 Polyvinyl acetal is a general name for a family of thermoplastic vinyl resins produced by the condensation of polyvinyl alcohol with an aldehyde. Examples are polyvinyl acetal, polyvinyl formal and polyvinyl butyral. The range of nominal conductor dimensions covered by this document is: width: minimum 2,0 mm; maximum 16,0 mm; thickness: minimum 0,80 mm; maximum 5,60 mm. width: min. 2,0 max. 31,5 mm; thickness: min. 0,80 mm max. 10,0 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified ratio width/thickness are given in IEC 60317-0-2.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60317-18 (REDLINE + STANDARD)-2020 PDF

IEC 60317-18 (REDLINE + STANDARD)-2020 PDF

$42.88 $85.75