IEC 60335-2-124 EXV-2024 PDF

IEC 60335-2-124 EXV-2024 PDF

Household and similar electrical appliances-Safety-Part 2-124: Particular requirements for commercial dry ice blasting machines (Extended Version)

$278.68 $557.36 -50%
Product Code: IEC 60335-2-124 EXV
Stock In Stock
Edition: 1.0
Published: 01/2024
Number of Pages: 296
File Size: 1 file

Available Options

Product Description

Household and similar electrical appliances – Safety – Part 2-124: Particular requirements for commercial dry ice blasting machines (Extended Version)

Introduction: Edition 6 of IEC 60335-1:2020 defines and introduces requirements for a detachable power supply part of an appliance. In the document, 24.2 prohibits the use of a power supply in a flexible cord. QUESTION: Does Subclause 24.2 prohibit the use of a detachable power supply part? ANSWER No, a "detachable power supply part" is a defined term and is not captured by the term "power supply" as used in Subclause 24.2. NOTE A detachable power supply part is captured by the defined term when the output of the power supply part is detachable from the class III construction part of the appliance at: the power supply part, or the class III construction part of the appliance. However, the supply cord (if any) does not have to be detachable from the detachable power supply part. IEC 60335-1:2020-09/ISH1:2021-11(en)

Scope: This part of IEC 60335 deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the following hand-guided applications: cleaning, decoating, stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive. The following power systems are covered: mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, battery-operated machines. This standard does not apply to dry ice blasting machines with integrated generation of compressed air; dry ice blasting machines using other transport gases besides compressed air or nitrogen; dry ice blasting machines with nozzles being controlled by robotic arms; spray extraction machines for commercial use (IEC 60335-2-68); high pressure cleaners (IEC 60335-2-79); sand blasting equipment (abrasive blasting); hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); machines designed for use in corrosive or explosive environments (dust, vapour or gas); machines designed for use in vehicles in non-ventilated environment; machines designed for use on board of ships or aircraft. NOTE 101 Attention is drawn to the fact that in many countries, additional requirements on the safe use of the equipment covered can be specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60335-2-124 EXV-2024 PDF

IEC 60335-2-124 EXV-2024 PDF

$278.68 $557.36