IEC 60335-2-34 CMV-2024 PDF

IEC 60335-2-34 CMV-2024 PDF

Household and similar electrical appliances-Safety-Part 2-34: Particular requirements for motor-compressors (Commented Version)

$372.00 $743.99 -50%
Product Code: IEC 60335-2-34 CMV
Stock In Stock
Edition: 7.0
Published: 11/2024
Number of Pages: 158
File Size: 1 file

Available Options

Product Description

Household and similar electrical appliances – Safety – Part 2-34: Particular requirements for motor-compressors (Commented Version)

Introduction: It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. Guidance documents concerning the application of the safety requirements for appliances can be accessed via TC 61 supporting documents on the IEC website https://www.iec.ch/tc61/supportingdocuments This information is given for the convenience of users of this International Standard and does not constitute a replacement for the normative text in this standard. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may can differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2

Scope: This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of sealed (hermetic and semi-hermetic type) motor- compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may can be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 600 V for other multi-phase, 600 V direct- current (DC) motor-compressors. This standard also covers multi-speed motor-compressors, that are motor-compressors, the speed of which can be set to different values; variable capacity motor-compressors that are motor-compressors where the capacity of the compressor is controlled at fixed speeds. NOTE 101 Examples of equipment which contain motor-compressors are tumble dryers (IEC 60335-2-11); refrigerating appliances, ice-cream appliances and ice-makers (IEC 60335-2-24); electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40); commercial dispensing appliances and vending machines (IEC 60335-2-75); commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or compressor (IEC 60335-2-89); electrical refrigerating equipment for measurement, control, and laboratory use (IEC 61010-2-011); professional ice-cream makers (IEC 60335-2-118); refrigerating professional systems and heat pumps (ISO 5149-2); This standard does not supersede the requirements of standards relevant to the particular appliance in which the motor-compressor is used. However, if the motor-compressor type used complies with this standard, it will not be necessary for the tests for the motor- compressor specified in the particular appliance standard may not need to be made in the particular appliance or assembly. If the motor-compressor control system is associated with the particular appliance control system, additional tests could be necessary on the final appliance end product. So far as is practical, this standard deals with the common ha

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Power input and current
  • 11 Heating
  • 12 Void Charging of metal-ion batteries
  • 13 Leakage current and electric strength at operating temperature
  • 14 Transient overvoltages
  • 15 Moisture resistance
  • 16 Leakage current and electric strength
  • 17 Overload protection of transformers and associated circuits
  • 18 Endurance
  • 19 Abnormal operation
  • 20 Stability and mechanical hazards
  • 21 Mechanical strength
  • 22 Construction
  • 23 Internal wiring
  • 24 Components
  • 25 Supply connection and external flexible cords
  • 26 Terminals for external conductors
  • 27 Provision for earthing
  • 28 Screws and connections
  • 29 Clearances, creepage distances and solid insulation
  • 30 Resistance to heat and fire
  • 31 Resistance to rusting
  • 32 Radiation, toxicity and similar hazards

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60335-2-34 CMV-2024 PDF

IEC 60335-2-34 CMV-2024 PDF

$372.00 $743.99