IEC 60335-2-40 EXV-2024 PDF

IEC 60335-2-40 EXV-2024 PDF

Household and similar electrical appliances-Safety-Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (Extended Version)

$584.48 $1,168.95 -50%
Product Code: IEC 60335-2-40 EXV
Stock In Stock
Edition: 8.0
Published: 12/2024
Number of Pages: 650
File Size: 1 file

Available Options

Product Description

Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (Extended Version)

Introduction: Edition 6 of IEC 60335-1:2020 defines and introduces requirements for a detachable power supply part of an appliance. In the document, 24.2 prohibits the use of a power supply in a flexible cord. QUESTION: Does Subclause 24.2 prohibit the use of a detachable power supply part? ANSWER No, a "detachable power supply part" is a defined term and is not captured by the term "power supply" as used in Subclause 24.2. NOTE A detachable power supply part is captured by the defined term when the output of the power supply part is detachable from the class III construction part of the appliance at: the power supply part, or the class III construction part of the appliance. However, the supply cord (if any) does not have to be detachable from the detachable power supply part. IEC 60335-1:2020-09/ISH1:2021-11(en)

Scope: This part of IEC 60335 deals with the safety of electric heat pumps, sanitary hot water heat pumps and air-conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units, their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laypersons in shops, in light industry and on farms, are within the scope of this standard. The appliances referenced above can consist of one or more factory-made assemblies. If provided in more than one assembly, the separate assemblies are used together, and the requirements are based on the use of matched assemblies. NOTE 101 A definition of 'motor-compressor' is given in IEC 60335-2-34, which includes the statement that the term motor-compressor is used to designate either a hermetic motor-compressor or semi-hermetic motor-compressor. NOTE 102 Requirements for containers intended for storage of the heated water included in sanitary hot water heat pumps are, in addition, covered by IEC 60335-2-21. This standard does not take into account refrigerants other than group A1, A2L, A2 and A3 as defined by ISO 817. Flammable refrigerants are limited to those of a molar mass of more than or equal to 42 kg/kmol based on WCF (worst case formulation) as specified in ISO 817. As far as practical, this standard deals with common hazards presented by appliances that are encountered in normal use and assumes that installation, servicing, decommissioning, and disposal are safely handled by competent persons and accidental release of refrigerants is avoided. However, it does not specify the criteria to ensure competence of persons during installation, servicing and disposal. Safety requirements during disposal are not specified in this standard. NOTE 103 Annex HH provides informative requirements on competence of personnel. Criteria for competence of

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60335-2-40 EXV-2024 PDF

IEC 60335-2-40 EXV-2024 PDF

$584.48 $1,168.95