Household and similar electrical appliances – Safety – Part 2-7: Particular requirements for washing machines
Introduction: It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. NOTE 1 For example, if appliances within the scope of this Part 2 have a separate spin container for water extraction, IEC 60335-2-4 is also applicable as far as is reasonable; have a drying function, IEC 60335-2-11 is also applicable is applicable as far as is reasonable. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Par
Scope: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also deals with the safety of electric washing machines for household and similar use employing an electrolyte instead of detergent. Additional requirements for these appliances are given in Annex CC. NOTE 101 Guidance is given in Annex DD for requirements that may can be used to ensure an acceptable level of protection against electrical and thermal hazards for washing machines fitted with a power driven wringer. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. NOTE 102 Examples of such appliances are washing machines for communal use in blocks of flats or in launderettes. As far as is practicable, this standard deals with the common hazards presented by washing machines that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. NOTE 103 Attention is drawn to the fact that for washing machines intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 104 This standard does not apply to washing machines intended exclusively for industrial purposes (ISO 10472-2); appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere
Contents:
- FOREWORD
- INTRODUCTION
- Scope