Household and similar electrical appliances – Safety – Part 2-90: Particular requirements for commercial microwave ovens
Introduction: It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. Guidance documents concerning the application of the safety requirements for appliances can be accessed via TC 61 and SC 61B supporting documents on the IEC website https://www.iec.ch/tc61/supportingdocuments https://www.iec.ch/sc61b/supportingdocuments This information is given for the convenience of users of this International Standard and does not constitute a replacement for the normative text in this standard. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may can differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one fu
Scope: This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with: the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. These appliances are not intended for household and similar purposes. They are used for commercial processing of food, also in areas open to the public, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries and butcheries; the safety of combination microwave ovens with a cavity door, the requirements of which are contained in normative Annex AA; the safety of microwave ovens without a cavity door and with transportation means that are intended for commercial use only, for the heating of food and beverages, the requirements of which are contained in normative Annex BB. Microwave ovens covered by normative Annex BB have transportation means for moving the load through the microwave oven. Requirements for tunnel microwave ovens and several types of microwave vending machines are covered. This standard also deals with microwave ovens intended to be used on board ships, for which normative Annex EE is applicable. NOTE 101 In normative Annex BB, a microwave oven without a cavity door and with transportation means is described as a microwave oven. All clauses of this standard apply to these appliances unless otherwise specified in normative Annex BB. This part of IEC 60335 also takes into account ordinary persons having access to the removing area of the vending machine. NOTE 102 The appliance may can be built into a vending machine, in which case IEC 60335-2- 75 maycan also be applicable. NOTE 103 Appliances that use non-electrical energy are within the scope of this standard. In general, this standard does not take into account the use of appliances by young children or infirm persons without supervision; playing with the appliance by young children. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. IEC 60335-2-90:2024 RLV © IEC 2024 – 9 – This standa
Contents:
- FOREWORD
- INTRODUCTION
- Scope