IEC 60364-4-41-2017 PDF

IEC 60364-4-41-2017 PDF

Low-voltage electrical installations-Part 4-41: Protection for safety-Protection against electric shock

$349.93 $699.85 -50%
Product Code: IEC 60364-4-41
Stock In Stock
Edition: 5.1
Published: 03/2017
Number of Pages: 158
File Size: 0 files

Available Options

Product Description

Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock

Introduction: This Part 4-41 of IEC 60364 deals with protection against electric shock as applied to electrical installations. It is based on IEC 61140 which is a basic safety standard that applies to the protection of persons and livestock. IEC 61140 is intended to give fundamental principles and requirements that are common to electrical installations and equipment or are necessary for their co-ordination. The fundamental rule of protection against electric shock, according to IEC 61140, is that hazardous-live-parts must not be accessible and accessible conductive parts must not be hazardous live, neither under normal conditions nor under single fault conditions. According to 4.2 of IEC 61140, protection under normal conditions is provided by basic protective provisions and protection under single fault conditions is provided by fault protective provisions. Alternatively, protection against electric shock is provided by an enhanced protective provision, which provides protection under normal conditions and under single fault conditions. This standard has the status of a group safety publication (GSP) for protection against electric shock. In the fourth edition of IEC 60364 (2001): protection under normal conditions (now designated basic protection) was referred to as protection against direct contact and protection under fault conditions (now designated fault protection) was referred to as protection against indirect contact.

Contents:

  • FOREWORD
  • 410 Introduction
  • 410.1 Scope
  • 410.2 Normative references
  • 410.3 General requirements
  • 411 Protective measure: automatic disconnection of supply
  • 411.1 General
  • 411.2 Requirements for basic protection
  • 411.3 Requirements for fault protection
  • 411.4 TN system
  • 411.5 TT system
  • 411.6 IT system
  • 411.7 Functional extra-low voltage (FELV)
  • 412 Protective measure: double or reinforced insulation
  • 412.1 General
  • 412.2 Requirements for basic protection and fault protection
  • 413 Protective measure: electrical separation
  • 413.1 General
  • 413.2 Requirements for basic protection
  • 413.3 Requirements for fault protection
  • 414 Protective measure: extra-low-voltage provided by SELV and PELV
  • 414.1 General
  • 414.2 Requirements for basic protection and fault protection
  • 414.3 Sources for SELV and PELV
  • 414.4 Requirements for SELV and PELV circuits
  • 415 Additional protection
  • 415.1 Additional protection: residual current protective devices (RCDs)
  • 415.2 Additional protection: supplementary protective equipotential bonding

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60364-4-41-2017 PDF

IEC 60364-4-41-2017 PDF

$349.93 $699.85