Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores
Introduction: For various reasons, a manufacturer may wish to publish in its catalogue typical data for material parameters as measured on test pieces. It is the object of this part of IEC 60401 to promote the comparability of such information in the area of soft ferrite materials. Except for several specific property limits that should be given separately for each particular core, the properties described in this standard are material characteristics, intended to facilitate meaningful evaluation of ferrite materials. It should be recognized, however, that there is no direct relation between material characteristics as measured on test pieces and the corresponding parameters measured on other cores, made of the same material, because of differences in geometry and variation in production processes. Also, the extrapolation of material characteristics to other flux densities and other frequencies will not permit valid comparison of cores of different materials under these new conditions of operation. It is therefore emphasized that it is impossible to design and specify a core on the basis of material properties published by a manufacturer in its catalogue, without due contact with that manufacturer. Also, the publication of material characteristics should not be considered as a guarantee for core properties; for this purpose, only the specification of that core should be used. It is strongly recommended that, together with the material characteristics, manufacturers publish a note covering
Scope: This part of IEC 60401 gives guidelines for a uniform method of presentation for the properties of magnetically soft ferrite materials and measuring conditions under which they should be determined. It is intended for use in manufacturers' catalogues of transformer and inductor cores, in order to aid the comparability of such data. Additional guidance is given for users and manufacturers concerning testing and specification of reliability for ferrite cores and for devices using ferrite cores.
Contents:
- FOREWORD
- INTRODUCTION
- Scope