IEC 60422-2024 PDF

IEC 60422-2024 PDF

Mineral insulating oils in electrical equipment-Supervision and maintenance guidance

$239.59 $479.18 -50%
Product Code: IEC 60422
Stock In Stock
Edition: 5.0
Published: 07/2024
Number of Pages: 144
File Size: 1 file, 2 Bytes

Available Options

Product Description

Mineral insulating oils in electrical equipment – Supervision and maintenance guidance

Introduction: Insulating mineral oils are used in electrical equipment employed in the generation, transmission, distribution, and use of electrical energy. Monitoring and maintaining oil quality is essential to ensure the reliable operation of oil-filled electrical equipment. Codes of practice for this purpose have been established by electrical power authorities, power companies and industries in many countries. A review of current experience reveals a wide variation of procedures and guidance. It is possible, however, to compare the value and significance of standardized oil tests and to recommend uniform criteria for the evaluation of test data. If a certain amount of oil deterioration (by degradation or contamination) is exceeded, there is inevitably some erosion of safety margins and the question of the risk of failure should be considered. While the quantification of the risk can be very difficult, a first step involves the identification of potential effects of increased deterioration. The philosophy underlying this document is to furnish users with as broad a base of understanding of oil quality deterioration as is available, so that they can make informed decisions on inspection and maintenance practices. Mineral oils are valuable resources and should be utilised accordingly. Used mineral oils are, by most regulations, deemed to be controlled waste. If spills occur, this can have a negative environmental impact especially if the oil is contaminated by persistent organic pollutant

Scope: This document provides monitoring guidance and procedures that are required for the use and maintenance of mineral insulating oils and other hydrocarbon-based liquids in transformers and other electrical equipment, including strategic spares and tanks for holding spare parts and components. This document is applicable to mineral insulating oils, originally supplied conforming to IEC 60296, in transformers, switchgear and other electrical apparatus where oil sampling is reasonably practicable, and where the normal operating conditions specified in the equipment specifications apply. This document is also intended to assist the power equipment operator to evaluate the condition of the oil and maintain it in a serviceable condition. It also provides a common basis for the preparation of more specific and complete local codes of practice. The document includes recommendations on tests and evaluation procedures, and outlines methods for reconditioning and reclaiming oil, and the decontamination of oil contaminated with PCBs. NOTE The condition monitoring of electrical equipment, for example by analysis of dissolved gases, furanic compounds or other means, is outside the scope of this document.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60422-2024 PDF

IEC 60422-2024 PDF

$239.59 $479.18