Radio interference test on high-voltage insulators (Commented Version)
Introduction: The first edition of IEC 60437 presented the available information on a radio interference test on high-voltage insulators as a technical report. This allowed further experience in conducting the test and the interpretation of results to be gained. The second edition incorporated that experience in the form of an International Standard, which gave the recommended procedures for a radio interference test on high-voltage insulators. This third edition incorporates clarification of test arrangements and the number of insulators to be tested for composite station posts, composite hollow core station posts and hybrid insulators. This edition also incorporates clarification on the fast method for the sample test.
Scope: This International Standard specifies the procedure for a radio interference (RI) test carried out in a laboratory on clean and dry insulators at a frequency of 0,5 MHz or 1 MHz or, alternatively, at other frequencies between 0,5 MHz and 2 MHz. This document applies to insulators for use on AC or DC overhead power lines and overhead traction lines with a nominal voltage greater than 1 000 V. 1 In service the RI characteristics of an insulator may be modified by the ambient conditions, particularly rainfall and other moisture, and by pollution. It is not considered feasible to specify reproducible test conditions to simulate a range of ambient conditions. Hence only tests on clean and dry insulators are specified in this document. NOTE The effects of insulator surface conditions, including pollution, are presented in Amendment 1 of CISPR 18- 2:2017, clause 6.3.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 13 Procedure for type tests