IEC 60512-9-5-2020 PDF

IEC 60512-9-5-2020 PDF

Connectors for electrical and electronic equipment-Tests and measurements-Part 9-5: Endurance tests-Test 9e: Current loading, cyclic

$25.22 $50.44 -50%
Product Code: IEC 60512-9-5
Stock In Stock
Edition: 2.0
Published: 06/2020
Number of Pages: 26
File Size: 1 file, 1020 Bytes

Available Options

Product Description

Connectors for electrical and electronic equipment – Tests and measurements – Part 9-5: Endurance tests – Test 9e: Current loading, cyclic

Introduction: The object of this document is to detail a standard method for subjecting solderless connections to a thermal stress conditioning by cyclic current loading, in order to verify the right combination of conductor material, termination material and tool application – if any is required, in view of any possible creep phenomena that might lead to a reduction of performance of the solderless connection. Although requiring electric power to apply the specified current loading, this test is an endurance test by thermal conditioning, whose aim is to submit specimens of connectors using solderless connections or of solderless connections to a repeated cycling between ambient temperature (normal laboratory conditions) and the upper limiting temperature (ULT) specified for the connector or solderless connection, either by the detail product specification or the manufacturer specification, or by the default values provided in the relevant part of IEC 60352 series. The way the solderless connection under test acts is affected both by the solderless termination design and material and the attached conductor size and material, as well as by any tool applied to produce the connection, with all relevant settings and accessories as specified for the particular combination of termination and conductor. Time “ON” represents the “heating” interval necessary to reach the ULT from ambient temperature, time “OFF” represents the “cooling” interval, necessary to cool down the specimen to ambient temper

Scope: This part of IEC 60512, when required by the detail product specification, is used for testing connectors or solderless connections within the scope of technical committee 48. It may also be used for similar devices when specified in a detail product specification. The object of this document is to detail a standard method for subjecting solderless connections to thermal stress conditioning by cyclic current loading.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60512-9-5-2020 PDF

IEC 60512-9-5-2020 PDF

$25.22 $50.44