IEC 60519-4-2026 PDF

IEC 60519-4-2026 PDF

Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

$365.69 $731.38 -50%
Product Code: IEC 60519-4
Stock In Stock
Edition: 5.1
Published: 02/2026
Number of Pages: 110
File Size: 1 file, 1.2 MB

Available Options

Product Description

Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

Introduction: This fifth edition of IEC 60519-4 is a product safety publication and is intended to: include all types of installations or equipment that are in the scope of IEC TC 27/MT 21 dealing with arc furnace installations; give requirements on electrical safety, touch currents, electric fields, magnetic fields and radiation; give means for verification of the requirements; make extensive use of the standards developed by IEC committees with horizontal or group safety functions and of relevant ISO standards, most of them being developed by ISO TC 244; include all material, references and requirements suitable for risk assessment and list of significant hazards. This document addresses mainly manufacturers making made-to-order equipment on a single project base. The manufacturer is well aware that it is his responsibility to make equipment safe through adequate risk reduction and it is the responsibility of the user to assess exposure of the operator in line with applicable health and safety regulations. Looking at projects providing single pieces of equipment or single installations, this clear division of responsibilities tends to blur, caused by inter alia: development of the process (normal operation) through the manufacturer and user, shared definition of working procedures for the operator by the manufacturer and user, the scope of delivery often including all protective means, individual sales contracts where users require an assessment of exposure through the manufacturer. Thus

Scope: This clause of Part 1 is replaced by the following. Replacement: This part of IEC 60519 provides particular safety requirements for arc furnace installations. This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial arc furnace installations, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse. This document specifies the requirements intended to be met by the manufacturer to ensure the safety of persons and property during the complete life cycle of the equipment from design through commissioning, operation, maintenance, inspection, to decommissioning, as well as in the event of foreseeable single fault condition that can occur in the equipment. The rated voltage of arc furnace installation can be in the range of low voltage or high voltage, details are given in 4.2. This standard is applicable to arc furnace installations such as: a) furnaces for direct arc heating, forming arcs between the electrode and metal such as the electric arc furnace using alternating current (EAF AC) or direct current (EAF DC), and the ladle furnace (LF); b) furnaces for arc-resistance heating forming arcs between the electrode and the charge material or heating the charge material by the Joule effect, such as the submerged arc- resistance furnace using alternating current (SAF AC), or direct current (SAF DC). NOTE 1 In some documents, the terms "smelter" or "electrical reduction furnace" are used. Furnace installation for unattended operation is not covered by this document. This document does not provide requirements for type testing. NOTE 2 Industrial equipment covered by this document is typically produced as a single unit or a very small number of units; such unit usually has a very high value and can cause severe harm at disintegration. This document does not address data security and hazards arising from neglect of security. With respect to noise of electrical an arc furnace, ISO 13578:2017, 6.1.23 applies. EAF DC and SAF DC are classified as zero frequency (0 Hz) equipment types. EAF AC, SAF AC and LF are classified as mains frequency (50

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60519-4-2026 PDF

IEC 60519-4-2026 PDF

$365.69 $731.38