Radiation protection instrumentation – Installed dose rate meters, warning assemblies and monitors – X and gamma radiation of energy between 50 keV and 7 MeV
Introduction: a) Technical background, main issues and organization of the standard This International Standard specifically focuses on radiation monitoring systems used for normal and incident conditions. This standard is intended for use by purchasers in developing specifications for their plant specific radiation monitoring systems and by manufacturers to identify needed product characteristics when developing systems for normal and incident conditions. Some specific instrument characteristics such as measurement range, required energy response and ambient environment requirements will depend upon the specific application. In such cases, guidance is provided on determining the specific requirements, but specific requirements themselves are not stated except as typical examples given in informative annexes. This standard is one associated with a series of standards which cover post accident radiation monitors important to safety in nuclear power plants. The full series is comprised of the following standards: IEC 60951-1 – Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 1: General requirements IEC 60951-2 – Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air IEC 60951-3 – Nuclear power plants – Instrumentation important to s
Scope: Sampling circuits and methods Accident and post accident conditions Normal and incident conditions SC 45B – Radiation protection and effluents monitoring Gas, particulate and iodine with sampling (OFF LINE) ISO 2889 IEC 60951-1 and IEC 60951-2 IEC 60761 series Liquid with sampling (OFF LINE) N/A N/A IEC 60861 Process stream (gaseous effluents, steam or liquid) without sampling (ON or IN-LINE) N/A IEC 60951-1 and IEC 60951-4 IEC 60768 N/A Area monitoring N/A IEC 60951-1 and IEC 60951-3 IEC 60532 Central system N/A IEC 61504 IEC 61559 (all parts) c) Recommendations and limitations regarding the application of the standard It is important to note that this standard establishes no additional functional requirements for safety systems. d) Description of the structure of the IEC SC 45A/SC 45B standard series and relationships with other IEC standards and other bodies’ documents (IAEA, ISO) The IEC 61508 series defines the requirements for an overall safety life-cycle framework and a system life-cycle framework. The IEC 61508 series should be complied with when developing instruments with safety functions for radiation monitoring outside the nuclear power plant sector whilst complying with the requirements defined in this standard. The top-level standard of the IEC SC 45A standard series is IEC 61513. It provides general requirements for instrumentation and control systems and equipment that are used to perform functions important to safety in nuclear power plants. IEC 61513 structures the IEC SC 45A standard series. IEC 61513 refers directly to other IEC SC 45A standards for general topics related to the categorization of functions and classification of systems, qualification, separation of systems, defence against common cause failure, software aspects of computer-based systems, hardware aspects of computer-based systems, and control room design. The standards referenced directly at this second level should be considered together with IEC 61513 as a consistent document set. At a third level, IEC SC 45A/SC 45B standards not directly referenced by IEC 61513 are standards related to specific equipment, technical methods or specific activities. Usually, these documents,
Contents: