IEC 60534-8-1-2005 PDF

IEC 60534-8-1-2005 PDF

Industrial-Process Control Valves Part 8: Noise Considerations Section One - Laboratory Measurement of Noise Generated by Aerodynamic Flow Through Control Valves

$72.51 $145.02 -50%
Product Code: IEC 60534-8-1
Stock In Stock
Edition: 2.0
Published: 09/2005
Number of Pages: 44
File Size: 1 file, 671 Bytes

Available Options

Product Description

BILINGUAL This part of IEC 60534-8 defines equipment, methods, and procedures for obtaining laboratory measurements of sound pressure levels radiated by control valves and/or associated piping configurations, including fixed restrictions, through which compressible fluids are passing. Control valves discharging to atmosphere are excluded from this standard. Method A is a uniform method of measuring the radiated noise from the valve and associated test piping and allows a comparison of various measuring results which is beneficial for both user and manufacturer. The noise criteria are expressed by determining the sound pressure level of the valve under consideration. Method B is a procedure for measuring the sound pressure levels within pipe systems upstream and downstream of the valve under fixed operating conditions. Since inaccuracies due to the pipe transmission are eliminated, this method is preferred for evaluation of the acoustical characteristic of valves. The noise characteristics to be determined are useful for the following reasons: a) to compare the performance of different valves; b) to plan measures for noise abatement; c) to determine acoustical characteristics of valves and valve assemblies; d) to enable proper sizing of sound absorbers; e) to determine possible adverse effects on ultra-sonic flow meter measurements.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60534-8-1-2005 PDF

IEC 60534-8-1-2005 PDF

$72.51 $145.02