Electrical insulating materials – Determination of the effects of ionizing radiation – Part 5: Procedures for assessment of ageing in service
Introduction: Organic and polymeric materials provide a significant proportion of the insulation used in electrical systems. These materials are sensitive to the effects of irradiation and the response varies widely between different types. It is therefore important to be able to assess the degree of degradation of these insulating materials during their service lifetimes. This part of IEC 60544 provides recommended procedures for assessing ageing of insulating materials in service. There are a number of approaches to the assessment of ageing of polymer-based components exposed to radiation environments [1], [2], [3], [4]1. These are based on the better understanding of the factors affecting ageing degradation which has been developed over several decades. In nuclear power plants, qualification programmes are normally used for the selection of components, including those based on polymeric materials. These initial qualification procedures, such as IEEE Std 323TM-19742 [5] and IEEE Std 383TM-19742 [6], were originally written before there was sufficient understanding of ageing mechanisms. Most of the methods discussed in this document are therefore used to supplement the initial qualification process. This document is the fifth in a series dealing with the effect of ionizing radiation on insulating materials. IEC 60544-1 (Radiation interaction and dosimetry) constitutes an introduction dealing very broadly with the problems involved in evaluating radiation effects. It also provides guidance
Scope: This part of IEC 60544 covers ageing assessment methods which can be applied to components based on polymeric materials (e.g. cable insulation and jackets, elastomeric seals, polymeric coatings, gaiters) which are used in environments where they are exposed to radiation. The object of this document is aimed at providing methods for the assessment of ageing in service. The approaches discussed in Clause 5 through Clause 9 cover ageing assessment programmes based on condition monitoring (CM), the use of sample deposits in severe environments and sampling of real-time aged components.
Contents:
- FOREWORD
- INTRODUCTION
- Scope