IEC 60601-2-39 (REDLINE + STANDARD)-2018 PDF

IEC 60601-2-39 (REDLINE + STANDARD)-2018 PDF

Medical electrical equipment-Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment

$225.09 $450.18 -50%
Product Code: IEC 60601-2-39 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 04/2018
Number of Pages: 92
File Size: 1 file, 1.5 MB

Available Options

Product Description

Medical electrical equipment – Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment

Introduction: The minimum safety requirements specified in this particular standard are considered to provide for a practical degree of safety in the operation of PERITONEAL DIALYSIS ME EQUIPMENT.

Scope: Replacement: This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of PERITONEAL DIALYSIS ME EQUIPMENT as defined in 201.3.208, hereafter referred to as PD EQUIPMENT. It applies to PD EQUIPMENT intended for use either by medical staff or under the supervision of medical experts, including PD EQUIPMENT operated by the PATIENT, regardless of whether the PD EQUIPMENT is used in a hospital or domestic environment. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document except in 7.2.13 and 8.4.1 of the general standard. NOTE See also 4.2 of the general standard. This document can also be applied to PD EQUIPMENT used for compensation or alleviation of disease, injury or disability. These particular requirements do not apply to the DIALYSING SOLUTION, or the DIALYSING SOLUTION CIRCUIT. 201.1.2 Object Replacement: The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements for PD EQUIPMENT as defined in 201.3.208. 201.1.3 Collateral standards Addition: This particular standard refers to those applicable collateral standards that are listed in Clause 2 of the general standard and Clause 201.2 of this particular standard. ______________ 1 The general standard is IEC 60601-1:2005 and IEC 60601-1:2005/AMD1:2012, Medical electrical equipment – Part 1: General requirements for basic safety and essential performance. – 8 – IEC 60601-2-39:2018 RLV © IEC 2018 The requirements of IEC 60601-1-3 and IEC 60601-1-8 do not apply to this standard. IEC 60601-1-2:2014, IEC 60601-1-8:2006 and IEC 60601-1-8:2006/AMD1:2012, and IEC 60601-1-11:2015 apply as modified in Clauses 202, 208 and 211. IEC 60601-1-3 and IEC 60601-1-12 do not apply. IEC 60601-1-9:2007 and IEC 60601-1-9:2007/AMD1:2013 do not apply as note

Contents:

  • FOREWORD
  • INTRODUCTION
  • 203 General requirements for radiation protection in diagnostic X-ray equipment
  • 206 Usability
  • 210 Process requirements for the development of physiologic closed-loop controllers

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60601-2-39 (REDLINE + STANDARD)-2018 PDF

IEC 60601-2-39 (REDLINE + STANDARD)-2018 PDF

$225.09 $450.18