IEC 60601-2-64 (REDLINE + STANDARD)-2025 PDF

IEC 60601-2-64 (REDLINE + STANDARD)-2025 PDF

Medical electrical equipment - Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment

$407.31 $814.61 -50%
Product Code: IEC 60601-2-64 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 12/2025
Number of Pages: 190
File Size: 1 file

Available Options

Product Description

Medical electrical equipment - Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment

Introduction: The use of LIGHT ION BEAM ME EQUIPMENT for RADIOTHERAPY purposes may can expose PATIENTS to danger if the ME EQUIPMENT fails to deliver the required dose to the PATIENT, or if the ME EQUIPMENT design does not satisfy standards of electrical and mechanical safety. The ME EQUIPMENT may can also cause danger to persons in the vicinity if the ME EQUIPMENT itself fails to contain the RADIATION adequately or if there are inadequacies in the design of the TREATMENT ROOM. This particular standard establishes requirements to be complied with by MANUFACTURERS in the design and construction of LIGHT ION BEAM ME EQUIPMENT for use in RADIOTHERAPY; it does not attempt to define their optimum performance requirements. Its purpose is to identify those features of design that are regarded, at the present time, as essential for the safe operation of such ME EQUIPMENT; it places limits on the degradation of ME EQUIPMENT performance beyond which it can be presumed that a fault condition exists and where an INTERLOCK then operates to prevent continued operation of the ME EQUIPMENT. Clause 201.10 contains limits beyond which INTERLOCKS prevent, INTERRUPT or TERMINATE IRRADIATION, cause INTERRUPTION OF IRRADIATION or cause TERMINATION OF IRRADIATION in order to insure that ESSENTIAL PERFORMANCE is maintained and to avoid an unsafe condition. TYPE TESTS that are performed by the MANUFACTURER, or SITE TESTS, which are not necessarily performed by the MANUFACTURER, are SPECIFIED for each requirement.

Contents:

  • FOREWORD
  • INTRODUCTION
  • 201.10 Protection against unwanted and excessive radiation HAZARDS
  • 201.11 Protection against excessive temperatures and other HAZARDS
  • 201.12 Accuracy of controls and instruments and protection against hazardous
  • 201.13 HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT
  • 201.14 PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)
  • 201.15 Construction of ME EQUIPMENT
  • 201.16 ME SYSTEMS
  • 201.17 ELECTROMAGNETIC DISTURBANCES of ME EQUIPMENT and ME SYSTEMS
  • 201.101 ELECTRONIC IMAGING DEVICES (EID)
  • 201.102 Operation of ME EQUIPMENT parts from outside the facility
  • 206 Usability

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60601-2-64 (REDLINE + STANDARD)-2025 PDF

IEC 60601-2-64 (REDLINE + STANDARD)-2025 PDF

$407.31 $814.61